On 07/14/2015 09:45 PM, Kirk Wallace wrote: > > I used to be a fan of USD. I made my lathe encoders using their 2" disks > and sensors and they are still working well. > http://www.wallacecompany.com/cnc_lathe/HNC/00001-1a.jpg > > I still like the idea of using disks and sensors and making the rest but > it's not nearly as cheap as it used to be. > > 1" Disk, 1000 CPR = $9 @ 50 qty > Sensor = $25 @ 50 qty > > Then come up with housings = $? Yes, this is the problem, housings. The HEDS are a nice little package, relatively dust-proof, just snaps together once you mount the mounting plate to the motor, I can put it on in about a minute per unit. I don't want to be making housings or any other special stuff. I sell these motor/encoder units just to help move along my servo amps.
Jon ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
