Thanks Chris, I reworked it using the halui.feed-inhibit with a set/reset coil for the push-button interaction, and it works perfect, stopping the machine,
I paralleled the inhibit signal along side the halui.program.pause and halui.program.resume outputs in my ladder program. I re-compiled back to the current 2.6.8, and motion stops as it should, due to utilizing the feed inhibit, but, on the resume there is still some funny business that I am noticing, a couple of times, after I hit resume, the machine actually sat there for 3-4 seconds, before continuing with the programmed g-code. On 7/15/2015 4:43 PM, Chris Morley wrote: > >> Date: Wed, 15 Jul 2015 15:20:26 -0400 >> From: r...@superiorroll.com >> To: emc-users@lists.sourceforge.net >> Subject: Re: [Emc-users] Bug in 2.6 and Newer >> >> I just switched it over to signal the motion.feed-hold input instead, it >> stops motion, but how do you get it to resume? >> >> Nothing I push resumes motion. >> >> >> Rick >> >> > motion.feed-inhibit is the pin to use as it can't be overridden with an m > code. > it will finish a thread move before pausing. > > having the pin true pauses, false allows movement. > > Chris M > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
