On Sat, 5 Sep 2015, John Alexander Stewart wrote: > Date: Sat, 5 Sep 2015 11:37:08 -0400 > From: John Alexander Stewart <ivatt...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: [Emc-users] Mesa software out of date error? > > Hi all; > > After updating to linuxcnc 2.7.0-pre6, I got the following message: > > hm2/hm2_5i25.0: Warning: sserial remote device 7i76 channel 0 has old > firmware that should be updated > > > Got the latest 5i25.zip from www.mesanet.com/software/parallel/5i25.zip > > ran sudo mesaflash --device 5i25 --write 5i25_7i76x2.bit > > powered off and rebooted the machine, still gives the warning. > > Ran sudo mesaflash --device 5i25 --reload > > and it still gives the warning. It would seem that I'm updating the 5i25, > but maybe I should be updating the 7i76 - correct?? > > Any idea of what files should be downloaded, and what process to use? > > Merci - John.
Yes, the complaint is about the 7I76s firmware download http://www.mesanet.com/software/parallel/sserial.zip cd to the utils/linuxcnc directory and read the README file > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
