This what locate returns for halcompile,
greenmill@greenmill:~$ locate halcompile /home/greenmill/.local/share/Trash/files/linuxcnc-dev/docs/man/man1/halcompile.1 /home/greenmill/.local/share/Trash/files/linuxcnc-dev/src/hal/utils/halcompile.g /home/greenmill/linuxcnc-dev/docs/man/man1/halcompile.1 /home/greenmill/linuxcnc-dev/src/hal/utils/halcompile.g > -------- Original Message -------- > Subject: Re: [Emc-users] Carousel Component > From: andy pugh <bodge...@gmail.com> > Date: Fri, October 30, 2015 12:01 pm > To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > > > On 30 October 2015 at 15:29, <r...@superiorroll.com> wrote: > > sudo: halcompile: command not found > > Do you have the linuxcnc-dev package installed? > > halcompile used to be called comp, but I think that your version is > new enough for it to be halcompile. > > I am slightly surprised that you have the carousel.comp file, > actually. And that you appear to have a linuxcnc-dev directory. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users