So far I know you use a MDI_COMMAND in the .ini file and then you connect that through halui.mdi-command-01
------ Original Message ------ From: "Rick Lair" <r...@superiorroll.com> To: "Emc Users" <emc-users@lists.sourceforge.net> Sent: 2015-11-11 15:13:57 Subject: [Emc-users] Call an M Code from a Classic ladder output >Good Morning Gentleman, > >Is it possible, to call an m-code using a classicladder output? > >Now that I have my tool changer working, I am trying to work into my >ladder logic the ability to call a M40, and it will put the tool that >is >in the spindle back into the carousel, and then when the logic is >finished, have classicladder call an M39. > >The M40 is going to "sets return-tool true", and I was going to use the >the M39 to "sets return-tool false". Unless there is a better way to >reset the signal without calling the M39? Really I need the M40 to >pulse >the "return-tool" signal true for maybe 3-4 tenths of a second to get >the ladder rolling, but my original train of thought is just fine. > > >-- > >Thanks > > >Rick Lair >Superior Roll & Turning LLC >399 East Center Street >Petersburg MI, 49270 >PH: 734-279-1831 >FAX: 734-279-1166 >www.superiorroll.com > > >------------------------------------------------------------------------------ >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
