I just tweaked naive cam detection to handle uvw axes too. Can you guys give it a spin and see if it makes up the difference?
-Rob On Wed, Nov 25, 2015, 4:09 PM sam sokolik <sa...@empirescreen.com> wrote: > the thing that is missing with uvy blends it the nieve cam detector > (combining of short line segments..) so it will run just a bit slower. > > sam > > On 11/25/2015 12:17 PM, Todd Zuercher wrote: > > Just for perspective the current version of 2.7 using XYZW runs the file > below in 10min. 44sec. > > > > ----- Original Message ----- > > From: "Todd Zuercher" <zuerc...@embarqmail.com> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Sent: Wednesday, November 25, 2015 10:17:03 AM > > Subject: Re: [Emc-users] calling Todd Z > > > > Seems to be working great. I haven't found a problem XYZ and XYZW code > seem to run mostly the same now, but not exactly. The first file I tested > ran in 7min. 10 sec. using only XYZ code (with the W slaved to Z) and the > same file using XYZW code, ran in 7min. 28sec. > > > > ----- Original Message ----- > > From: "Robert Ellenberg" <rwe...@gmail.com> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Sent: Tuesday, November 24, 2015 11:39:38 PM > > Subject: Re: [Emc-users] calling Todd Z > > > > Ok, i just pushed a fix for that build error, and now it seems to compile > > and run on my RTAI VM. Also, I pushed the branch to the main linuxcnc > > repository for the buildbot to chew on. > > > > -Rob > > > > On Tue, Nov 24, 2015 at 4:16 PM, Robert Ellenberg <rwe...@gmail.com> > wrote: > > > >> Todd, > >> > >> I'll troubleshoot the build tonight, it looks like a symbol is missing > in > >> the RT build that's available in the sim build. > >> > >> Rob > >> > >> On Tue, Nov 24, 2015, 4:09 PM Todd Zuercher <zuerc...@embarqmail.com> > >> wrote: > >> > >>> I think I forgot to do the sudo make setuid. > >>> did that now, and this is what it spits out. > >>> > >>> LINUXCNC - 2.7.2 > >>> Machine configuration directory is > >>> '/home/digital4/linuxcnc/configs/Digital_4_ZZ' > >>> Machine configuration file is 'Digital_4w.ini' > >>> Starting LinuxCNC... > >>> insmod: can't read '/home/digital4/linuxcnc-uvw/rtlib/rtapi.ko': No > such > >>> file or directory > >>> Realtime system did not load > >>> Shutting down and cleaning up LinuxCNC... > >>> Running HAL shutdown script > >>> /home/digital4/linuxcnc-uvw/bin/linuxcnc_module_helper: Invalid usage > >>> with args: remove hal_lib > >>> > >>> Usage: /home/digital4/linuxcnc-uvw/bin/linuxcnc_module_helper insert > >>> /path/to/module.ext [param1=value1 ...] > >>> > >>> where module is one of: > >>> rtai_math > >>> rtai_sem > >>> rtai_shm > >>> rtai_fifos > >>> rtai_up > >>> rtai_lxrt > >>> rtai_hal > >>> rtai_sched > >>> rtai_smi > >>> rtai > >>> rt_mem_mgr > >>> adeos > >>> > >>> the path starts with one of: > >>> /lib/modules > >>> /usr/realtime-2.6.32-122-rtai > >>> > >>> and the extension is one of: > >>> .ko > >>> > >>> or the module is in the directory /home/digital4/linuxcnc-uvw/rtlib > >>> > >>> OR > >>> > >>> /home/digital4/linuxcnc-uvw/bin/linuxcnc_module_helper remove module > >>> > >>> where module is one of the modules listed above. > >>> > >>> /home/digital4/linuxcnc-uvw/bin/linuxcnc_module_helper: Invalid usage > >>> with args: remove rtapi > >>> > >>> Usage: /home/digital4/linuxcnc-uvw/bin/linuxcnc_module_helper insert > >>> /path/to/module.ext [param1=value1 ...] > >>> > >>> where module is one of: > >>> rtai_math > >>> rtai_sem > >>> rtai_shm > >>> rtai_fifos > >>> rtai_up > >>> rtai_lxrt > >>> rtai_hal > >>> rtai_sched > >>> rtai_smi > >>> rtai > >>> rt_mem_mgr > >>> adeos > >>> > >>> the path starts with one of: > >>> /lib/modules > >>> /usr/realtime-2.6.32-122-rtai > >>> > >>> and the extension is one of: > >>> .ko > >>> > >>> or the module is in the directory /home/digital4/linuxcnc-uvw/rtlib > >>> > >>> OR > >>> > >>> /home/digital4/linuxcnc-uvw/bin/linuxcnc_module_helper remove module > >>> > >>> where module is one of the modules listed above. > >>> > >>> LinuxCNC terminated with an error. You can find more information in > the > >>> log: > >>> /home/digital4/linuxcnc_debug.txt > >>> and > >>> /home/digital4/linuxcnc_print.txt > >>> as well as in the output of the shell command 'dmesg' and in the > terminal > >>> > >>> > >>> > ------------------------------------------------------------------------------ > >>> Go from Idea to Many App Stores Faster with Intel(R) XDK > >>> Give your users amazing mobile app experiences with Intel(R) XDK. > >>> Use one codebase in this all-in-one HTML5 development environment. > >>> Design, debug & build mobile apps & 2D/3D high-impact games for > multiple > >>> OSs. > >>> http://pubads.g.doubleclick.net/gampad/clk?id=254741551&iu=/4140 > >>> _______________________________________________ > >>> Emc-users mailing list > >>> Emc-users@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/emc-users > >>> > > > ------------------------------------------------------------------------------ > > Go from Idea to Many App Stores Faster with Intel(R) XDK > > Give your users amazing mobile app experiences with Intel(R) XDK. > > Use one codebase in this all-in-one HTML5 development environment. > > Design, debug & build mobile apps & 2D/3D high-impact games for multiple > OSs. > > http://pubads.g.doubleclick.net/gampad/clk?id=254741551&iu=/4140 > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > ------------------------------------------------------------------------------ > > Go from Idea to Many App Stores Faster with Intel(R) XDK > > Give your users amazing mobile app experiences with Intel(R) XDK. > > Use one codebase in this all-in-one HTML5 development environment. > > Design, debug & build mobile apps & 2D/3D high-impact games for multiple > OSs. > > http://pubads.g.doubleclick.net/gampad/clk?id=254741551&iu=/4140 > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > ------------------------------------------------------------------------------ > > Go from Idea to Many App Stores Faster with Intel(R) XDK > > Give your users amazing mobile app experiences with Intel(R) XDK. > > Use one codebase in this all-in-one HTML5 development environment. > > Design, debug & build mobile apps & 2D/3D high-impact games for multiple > OSs. > > http://pubads.g.doubleclick.net/gampad/clk?id=254741551&iu=/4140 > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > ------------------------------------------------------------------------------ > Go from Idea to Many App Stores Faster with Intel(R) XDK > Give your users amazing mobile app experiences with Intel(R) XDK. > Use one codebase in this all-in-one HTML5 development environment. > Design, debug & build mobile apps & 2D/3D high-impact games for multiple > OSs. > http://pubads.g.doubleclick.net/gampad/clk?id=254741551&iu=/4140 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
