Thanks everyone. Sarah, thanks for that great link. Not sure how I haven't come across that yet. I'm gonna look into everything. Thinking I might just got this route off the bat. Looking it might be a minimum of $1500 to fix the controls. I think the LCNC electronics will be cheaper..I hope. Want to get it up and running rather quickly as this will be put into service right away.
Anyone know the possibilty of switching one of these over to single phase during the conversion? I'm guessing the spindle drive is 3 phase. Would need to see it to know for sure. Don't have it in hand yet. On Mon, Dec 7, 2015 at 8:35 AM, andy pugh <bodge...@gmail.com> wrote: > On 7 December 2015 at 13:19, Stuart Stevenson <stus...@gmail.com> wrote: > > > > The harder and correct answer is 'not until you make it do it'. > > Having said that, the sequence required for a lathe is rather simpler > than for a milling machine. > > The "carousel" HAL component can do a lot of the work: > http://linuxcnc.org/docs/2.7/html/man/man9/carousel.9.html > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Go from Idea to Many App Stores Faster with Intel(R) XDK > Give your users amazing mobile app experiences with Intel(R) XDK. > Use one codebase in this all-in-one HTML5 development environment. > Design, debug & build mobile apps & 2D/3D high-impact games for multiple > OSs. > http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Go from Idea to Many App Stores Faster with Intel(R) XDK Give your users amazing mobile app experiences with Intel(R) XDK. Use one codebase in this all-in-one HTML5 development environment. Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs. http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users