I'll get a photo of what I did on my CHNC which has the motherboard just mounted to a panel...
JT On 12/31/2015 7:51 PM, Gene Heskett wrote: > I tried to hook up my soft start circuit tonight, but when I had it wired > in, the spindle didn't run. Checking dmesg, the card did not sign in > like it usually does. Backed out of the mainboard socket at least 1/8", > again. By bumping the parport cables molded connector against the wall. > > So I have an excedrin headache, number unk. Everytime I turn that > computer around, to plug in a usb cable to charge my DS201, or for any > reason, the 5i25 comes far enough out of the pci socket to disable > something. Or blow the card. At 90 bucks a pop, that isn't fun. > > Do you have a bracket that can somehow hold the card into the socket? > > Its an LP bracket in an LP box, but it needs something to nail the card > down into the slot a lot firmer than the LP bracket is holding it. > > Ideas, anybody? Or do I have to make a x-crossed-brace to go across the > top of the pci sockets? > > Thanks all. :) > > Cheers, Gene Heskett ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
