Todd, I would get a larger box to hold much of the controls, then put a 12 location load center with 15 amp breakers in it. Then mount a single disconnect box next to the control box and run a small piece of conduit between them. One place to lock out, all the wiring is now centralized and organized and you have all the correct protection. You even have some extra space for future growth.
jerry On Fri, Feb 5, 2016 at 2:22 PM, Todd Zuercher <zuerc...@embarqmail.com> wrote: > We have an old machine that through the years has become an ungainly ball > of wires. Currently with OSHA regs and all lockout tagout is a real pain as > it is on this machine. > > It is a gang router (didn't start out as one), and is connected to 9 > different single phase 110v breakers. One for each of the six 15amp routers > plus 3 more for the control, and motion. (that stuff totals at most another > 15amps.) > > Any suggestions for slimming this down so it could run off one set of > wires with a single disconnect at the machine? > > -- > > ======================================== > > Todd Zuercher > mailto:zuerc...@embarqmail.com > > ======================================== > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Jerry Scharf FINsix IT 650.285.6361 w 650.279.7017 m ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users