On 02/25/2016 09:08 PM, Kirk Wallace wrote: > My guess is that the driver for the wireless adapter tries > to set up the adapter as well as set up PC to work with > it. The driver seems to fail at the adapter setup, so the > PC bit fails too. It may be that the Windows sets the > adapter properly and this carries over to the next Linux > boot. I've seen this same behavior with other wireless and > video capture and tuner adapters on Linux. I have pretty > much given up on wireless adapters with Linux and save > time by using a wireless router plugged into the PC's > wired Ethernet port. It saves a lot of grief. I have a Dell Latitude 630 that runs Linux just fine, with either wired ethernet or wireless. I used to run a 10.04 Ubuntu (but NOT with rtai kernel). If I ran the rtai kernel, some of the management stuff was interfered with, the most noticeable thing was it would not shut off. Also, if you suspended or hibernated it, it would not come back out of that state. I then reloaded it with 12.04, and everything seems to work fine. There is still a bit of a quirk, if you hibernate or suspend, you have to manually brighten the screen after coming back on, and every time it blanks the screen you have to bring the brightness back up.
But, no network problems on that PARTICULAR machine. I've even run it with both wired and wireless running at the same time, in places that had restricted access on one of those networks. (This probably is no help to your particular problem.) Jon ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
