On 02/29/2016 08:01 PM, dan...@austin.rr.com wrote: > Wait, aren't these ALREADY connected at: > >>> net spindle-on wj200-vfd.0.run >>> net spindle-cw wj200-vfd.0.reverse >>> net spindle-at-speed wj200-vfd.0.is-at-speed > > Does "net spindle-on motion.spindle-on" do something additional, or just try > to connect "spindle-on" to an unstated "motion" component?
Nothing unstated happens. "net spindle-on motion.spindle-on" simply connects the "spindle-on" net to the "motion.spindle-on" pin. If you want that net to relay the information to some other pin, you need to explicitly connect that other pin to the net. If you say: net spindle-on motion.spindle-on net spindle-on wj200-vfd.0.run Then the spindle-on net will connect the motion.spindle-on pin to the wj200-vfd.0.run pin, which is probably what you want. -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
