On 03/08/2016 09:39 PM, Gene Heskett wrote:
>  From the .ini file:
>
> MIN_LIMIT   = -10.25000000
> MAX_LIMIT   = 0.36900000
>
>
OK, these are the distance from the home position, wherever 
you have it defined.  You ARE homing the machine to a fixed 
position, like a home or limit switch, right?  If not, then 
you have to have a defined home position, ie. you align the 
machine to match marks on the axes and click home at that 
position.  Then, you measure safe limits of travel from 
there and set the above soft limits to match.

If you don't home the machine, then these values are 
meaningless, but will cause erroneous error messages.

Then, you set the work coordinates with the touch off menu 
in Axis (don't know how to do it in other GUIs).

Jon

------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to