-----Original Message----- From: Peter C. Wallace [mailto:[email protected]] Sent: Thursday, April 14, 2016 10:40 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Following error on angular axis
On Thu, 14 Apr 2016, Eric H. Johnson wrote: > Date: Thu, 14 Apr 2016 09:20:01 -0400 > From: Eric H. Johnson <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "'Enhanced Machine Controller (EMC)'" > <[email protected]> > Subject: [Emc-users] Following error on angular axis > > All, > > > > I am trying to lick a problem with following error on an angular axis > (A). I am using a Mesa 7i43 with the 7i33 quad servo interface. If I > set the axis max_velocity above about 2 RPS I start getting following > errors on G0 moves with any reasonable value for FError (i.e. under 10 > degrees). The motor should be capable of almost 60 RPS. The encoder is > 500 count, 2000 with quadrature, so only a little over 1Khz / 4Khz > when I start to see the problem. > > > > The tuning is firm and giving good positional accuracy, and > mechanically there does not appear to be any significant mechanical > resistance to overcome. I have played with a number of the axis > parameters, but seems to come back to max_velocity, as adjusting > acceleration and PID parameters seems to have minimal effect on following error. > > > > Any ideas? > > > > Thanks, > > Eric > A plot would help, is ths 10 degrees of motor shaft position? Peter Wallace Mesa Electronics ---------------------------------------------------------------------------- -- Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
