On 16 April 2016 at 19:11, Danny Miller <dan...@austin.rr.com> wrote: > I see there's the "hal_manualtoolchange" component which seems like it > would fix this. Is that the logical answer? Can I ditch the tool table?
hal_manualtoolchange is intended to convert the operator into a tool-changing system. It pops up a dialog box and asks the operator to insert a tool. If you want to change what happens when M6 is issued then it is possible to redefine M6. http://linuxcnc.org/docs/2.7/html/remap/remap.html#_remapping_tool_change_related_codes_t_m6_m61 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
