Here is the bugtracker for path workbench http://www.freecadweb.org/tracker/my_view_page.php in Freecad. If you know the problem can you find it or file a good bug report?
On Thu, 12 May 2016 09:21:23 -0700 linden <l...@island.net> wrote: > Free cad path module is defiantly beta software at this stage. > The drilling routines seem to work reliably but any thing with arcs can > give you issues with G41 and G42 being swapped. This shows up in the gui > when the path is calculated and plotted so its not so scary you see it > right away.. > I have had issues with lay out of bolt circles as well but i think that > was operator error on the part of this monkey behind the keyboard more > than the program it self. It may have been some thing to do with arc > calculation again as i seemed to get one hole that was out of sequence. > I think there is a git hub branch under active development that may be > farther along i keep seeing subtle changes in the daily builds ppa so > people are hacking on it and making progress. > > > > > On 16-05-12 12:19 AM, Nicklas Karlsson wrote: > > I have seen a "path" workbench in Freecad but have not been able to try it > > yet. > > > > On Wed, 11 May 2016 20:26:53 -0400 > > Erik Friesen <e...@aercon.net> wrote: > > > >> I also have been trying out Fusion 360. It has some drawbacks but at this > >> point I am willing to put up with them for the CAM package. Importing an > >> stl from Alibre works well enough. It puts out some decent G code in my > >> opinion, and the post processor is easy to modify(If you know any > >> javascript). > >> > >> So its web based, but $300 won't buy you maintenance for any other equally > >> powerful cam. > >> > >> On Tue, Sep 29, 2015 at 1:59 AM, rudy du preez <r...@asmsa.co.za> wrote: > >> > >>> I can also report some success with Fusion 360. I have produced some GCODE > >>> for milling quite easily, creating the CAD model directly in Fusion 360. > >>> > >>> I have also done some turning work, starting with the Siemens turning Post > >>> and modifying it for LCNC. So far I have found it easy to modify. The G33 > >>> work the same is LCNC. The tool change is also easy to change and the > >>> upfront settings as well. G71 becomes G21, G0 becomes G20, CR= becomes R. > >>> > >>> Will need more work to do the rest. > >>> > >>> I also found it very useful to install it on my Macbook as well. It allows > >>> me to work at two different locations on the same project using the Cloud > >>> storage and without any USB sticks. > >>> > >>> Rudy > > ------------------------------------------------------------------------------ > > Mobile security can be enabling, not merely restricting. Employees who > > bring their own devices (BYOD) to work are irked by the imposition of MDM > > restrictions. Mobile Device Manager Plus allows you to control only the > > apps on BYO-devices by containerizing them, leaving personal data untouched! > > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Mobile security can be enabling, not merely restricting. Employees who > bring their own devices (BYOD) to work are irked by the imposition of MDM > restrictions. Mobile Device Manager Plus allows you to control only the > apps on BYO-devices by containerizing them, leaving personal data untouched! > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
