On Saturday 14 May 2016 21:35:11 John Alexander Stewart wrote: > On Sat, May 14, 2016 at 8:03 PM, Gene Heskett <[email protected]> wrote: > > You are dreaming John, it has 3, maybe 6mm studs screwed into the > > back of the chuck, which fit thru matching holes in the spindles > > flange & you have to putz around 20 minutes a nut to get the nut > > started straight, because theres not any real room between the > > flange and the spindle housing for fingers. > > I don't understand the issue with this. My go-to EMCO Compact-8 lathe > has 3 M8 bolts that you need to thread nuts on and tighten to hold > chucks in place. > > It is dead simple, and very fast. About the same as getting my L00 > lathe chuck changed on my larger lathe. > > Maybe, with Genes' little 7x lathe, it is too small for fingers to > fit, and it is a hassle?? > > John.
Absolutely a PIMA John, only about 5/16" an inch to play in. But in this case that makes "play" into a 4 letter word. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
