In motion module there is a signal "motion.program-line OUT S32".
On Fri, 20 May 2016 12:37:18 -0400 andy pugh <bodge...@gmail.com> wrote: > On 20 May 2016 at 11:10, Todd Zuercher > <zuerc...@embarqmail.com> wrote: > > What I want to know is when a G0 move is finished, > > You could look at motion.motion-type > > http://linuxcnc.org/docs/2.7/html/man/man9/motion.9.html#DEBUGGING PINS > > > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > ------------------------------------------------------------------------------ > Mobile security can be enabling, not merely restricting. Employees who > bring their own devices (BYOD) to work are irked by the imposition of MDM > restrictions. Mobile Device Manager Plus allows you to control only the > apps on BYO-devices by containerizing them, leaving personal data untouched! > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
