Thanks Michael... I'll try it out.
Dave On 6/5/2016 8:33 AM, Michael Büsch wrote: > Hi, > > I'd like to announce the first release of my LinuxCNC userspace HAL > module for PROFIBUS-DP. > It is based on the pyprofibus project that implements a PROFIBUS stack > in Python. > > https://bues.ch/h/profibus > > pyprofibus includes an example LinuxCNC project (linuxcnc-demo > directory) that connects LinuxCNC to an ET200S slave via HAL signals. > > pyprofibus can either be connected directly to LinuxCNC, or awlsim (a > S7 soft-PLC) can be put in between for additional signal processing > using an AWL/STL program. > > Feel free to experiment with this stuff. > I'd be happy if people try this on other PROFIBUS slaves and > find/squash some bugs in the process. > > Happy hacking and CNCing. > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
