tungsten moly wire is used for those reciprocating wedm's not a loop, but unwound slow thru cut, then rapid rewound during a pause when feed spool is sensed to be low tiny stuff but tough and re-usable all tools have pros & cons this stuff is triangular, tough and hell on guides (carbide pins ) cheap because of tool life and great with cheap labor that can untangle the break and rewind it onto the spool ( read Chinese/Indian workers ) or American DIY types ( 0 pay levels ;-) tjtr33 tomp
On 07/21/16 12:16, Gene Heskett wrote: > On Thursday 21 July 2016 00:00:12 TJoseph Powderly wrote: > >> Gene >> once again your post title ran me off as i took it to be correct >> your post is titled 'continuous wire' >> not disk, hahaha >> > My bad Tomp, I thought about it, but understood quickly that such a > machine was waaaaay above my pay grade. I was wondering if something > using just a couple feet of wire, butt welded like a bandsaw blade, > might be possible. Or would the wire, flooded for coolant, still burn up > rapidly? > > Thanks Tomp. > > Cheers, Gene Heskett ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
