On Thursday 11 August 2016 08:32:19 andy pugh wrote: > On 11 August 2016 at 03:52, Gene Heskett <[email protected]> wrote: > >> https://goo.gl/photos/aRHjN9GaddQWjYAC9 > > > > Pix worked fine. Cute little work holders, your patent, or can I > > buy them someplace? > > http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.T >R0.TRC0.H0.XSteel+T+Slots+Clamps+Set.TRS5&_nkw=Steel+T+Slots+Clamps+Set >&_sacat=0 > > But mine are the 1/2" size. And were cheaper.
On the G0704, the clamp kit Grizzly sold me as being the matching kit, wasn't. 3/8" studs, and I had to haul the t-nuts up to the little mill and remove about .020" from the base width on both sides to make them fit in the slots, and its still a bit snug as I have to air hose the slot before they can slide more than 1/2" when I need to move and re-arrange. A 3 slot table, the outside slots are hard to use as there's not enough table to keep the ratchet blocks in place & when doing a setup. I wind up picking those blocks up from wherever they've fallen, often more than once per block. Bookmarked. The way these are sized in the adv., represents what dimension of the slot? Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
