You might look at the probing routines here http://www.mesaus.com/info/probe-subroutines.zip
JT On 8/25/2016 11:27 PM, [email protected] wrote: > I'm trying the G38.2 z-probe in an ngc call. I keep getting an error "Probe > move on line 6 would exceed joint 2's negative limit". > > Problem seems to be that G38.2 uses the current coord system. I've got the > Z-home working now, and machine coords knows the furthest it can go, whereas > the active coord system Z-value is meaningless for a max probe target. > > I tried to prefix the G38.2 with G53 (machine coord operation), but I get an > error that G53 only works on G0/G1. > > Am I looking at the problem right? How can I make this "probe to a fixed > machine coord point"? > > Danny > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
