your using Cheap Probes John ? last one i bought cost me $3,500 after some idiot did exactly that .
i added some extra logic and a external keyswitch , to stop it happening On 7 September 2016 at 13:52, John Kasunich <jmkasun...@fastmail.fm> wrote: > > > On Wed, Sep 7, 2016, at 02:43 AM, Danny Miller wrote: > > I have a wireless toolsetting probe here. It's nice, but it's naturally > > sensitive. Even when you're not using it, very easy to trip, and > > LinuxCNC generates a "Probe triggering during jog" error. Just bump the > > table. The probe doesn't even have a physical hard switch, just the > plate. > > > > Hmm. I don't know why it was coded to do this, but it's a problem. > > Basically it should be ignoring Probe-in if it's not probing. > > You wouldn't think that if you ever ran the business end of a $500 > probe into the side of a vise while jogging.... > > The normal behavior is to protect sensitive and expensive equipment. > If you don't like that, you can modify it using HAL logic quite easily. > > -- > John Kasunich > jmkasun...@fastmail.fm > > ------------------------------------------------------------ > ------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the RcTechnix network. RcTechnix will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. RcTechnix reserves the right to monitor and record e-mail messages being sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring effective operation. (c) RcTechnix ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
