> On 11/29/2016 11:35 AM, Nicklas Karlsson wrote: > > GUI and possible EMCTASK should be possible to put on separate > > devices. Someone told be me NML have been broken but fixed. The gui > > is already there so if your device could run the code it should as > > far as I understand be possible to split the application. > > > > I want to achieve something similar but this is because I want to > > remove real time demand from user interface. It might also be useful > > with more than one GUI and remote control. > > An additional complication with running the UI on a separate machine > from the motion controller is that many (all?) UIs want to connect via > both NML and HAL, and there's no good remote HAL interface currently. > > So you'd have to either write a GUI that doesn't use HAL, or write a > remote HAL interface.
Maybe, I have several machines for two of them I have axis control up and running. I made hardware myself and unfortunately there is motors of several types: stepper, BLDC, DC and PMSM. Basically they are all up and running but there some more working with the control loops in the drivers then I could start work on linuxcnc. Major reason I made hardware myself is I need to know how it should be done to make my living anyway. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
