Hi Gene, No, I don't have anything like that.
JT On 12/3/2016 12:18 PM, Gene Heskett wrote: > Greetings; > > I spent an hour early this morning looking around in the cracks and > crannies of both web sites, looking for an adapter that would plug into > the 50 pin sockets on the 7i90, that would, without interfering with the > adjacent socket, give me a row of micro screw terminals so I wouldn't > have to putz with cutting these pissy-assed, cheap jumper cables in two > and splicing them onto the ends of the cables coming into the box, > > Failed miserably. > > I can well imagine that such a connector is not a COTS item. But trying > to get 50 wire ribbon cables to some place remote from a card like the > 7i90HD isn't a luxury I have room for, so I am forced to use these very > pooly built jumpers solder spliced & heat shrink covered to make the > transition from the larger gauge coupling wires in the cables going out > to the machine. It does suggest a new layout at some point for those > cards that use the 50 pin scsi-ii type sockets, putting one connector > per card edge so the plugging in of a purely passive terminal block > adaptor then leaves access for all 3, as opposed to haveing them covered > by their neighbors 50-way ribbons. > > Better, nearly as compact options? Suggestions aimed for limited overhead > situations? I'm all eyes. > > Cheers, Gene Heskett ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users