I have those same PA-09 crimpers. They will crimp the insanely tiny JST-SH (1.0mm pitch) connector. They work very well.
Stephen On Sat, Dec 3, 2016 at 8:33 PM, Danny Miller <[email protected]> wrote: > For those micro-pins, I had NO success with any crimper but this one, > which worked GREAT: > > https://www.amazon.com/gp/product/B002AVVO7K/ref=oh_aui_ > detailpage_o05_s00?ie=UTF8&psc=1 > > Yeah it's stupid expensive for what it is, but it worked for me, very > well. Perfect crimp on the copper and the insulation-grabber. > > Danny > > On 12/3/2016 12:47 PM, andy pugh wrote: > > On 3 December 2016 at 18:18, Gene Heskett <[email protected]> wrote: > >> Better, nearly as compact options? Suggestions aimed for limited > overhead > >> situations? I'm all eyes. > > http://www.digikey.com/product-detail/en/harwin-inc/ > M20-1071000/952-2027-ND/3727991 > > plus > > http://www.digikey.com/product-detail/en/harwin-inc/ > M20-1160042/952-2157-2-ND/3728123 > > > > You will need a rather small W-crimper. But then you can extract and > > re-arrange the wires pretty easily. > > > > That's a 30-way. I tend to cut them to size, or glue together smaller > ones. > > > > An example in use, but I don't normally use ribbon cable, that just > > happened to be handy at the time: > > https://goo.gl/photos/2pAhdHNDjoAD3Xg6A > > > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
