Nicklas , any changes needed , i'd like to know should we put a repro together , might make life easier
Sarah On 2 January 2017 at 18:34, Nicklas Karlsson <nicklas.karlsso...@gmail.com> wrote: > Me is novice on EDM but it seems you know what you are doing. I got > digital outputs connected on machine this weekend and will probably be able > to test this weekend. > > I have made my own servo drivers with interpolated position mode, response > is fast even though I have not yet perfected control loop. I read thru > books right now to get control loop as good as possible. > > If anyone else want interpolated position mode I could help modify > linuxcnc protocol, modification is simple. > > > On Mon, 2 Jan 2017 23:53:55 +0700 > TJoseph Powderly <tjt...@gmail.com> wrote: > > > Hello > > video of early iteration of edm panel in use > > https://videobin.org/+fe8/jab.html > > i think an example of reading the db file needs to be done soon > > but a working model is better than just thinkin' > > thanks > > tomp tjtr33 > > > > > > > > ------------------------------------------------------------ > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the RcTechnix network. RcTechnix will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. RcTechnix reserves the right to monitor and record e-mail messages being sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring effective operation. (c) RcTechnix ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
