2017-01-15 18:10 GMT+02:00 Peter C. Wallace <p...@mesanet.com>: > > Proper firmware for 7I48 and 7I44 is 5i24_16_svss6_8.bit > > NOTE: 7I48 on P4 (IO 0..23) , 7I44 on P2 (IO 48..71) >
I got so far that manipulating pwmgen value pin does change voltage on 7i48 outputs, so that seems to be correct and working. I am struggling with 7i44 and 7i71/7i70 boards - how do I find out, what is wrong? The thing is that I do not see anything about them in 'show HAL config'. In 7i44's manual I found the note about using correct cable between 7i44 and its daughterboard. As far as I can see through the connector, the wire colours are matching, so I guess that those are straight-through wires. Currently I do not see a single LED shining on any of these boards (7i44 and its daughterboards). Not even next to rj-45 connectors. Power to 7i44 is supplied to P1 connector and 'cable power' jumper is in 'off' position. 5v and 3,3v voltages show up on 7i70/7i71 board on capacitor legs, which makes me thing that actual power is delivered to these boards. Viesturs ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
