On Monday 27 February 2017 05:04:10 andy pugh wrote: > On 26 February 2017 at 20:22, Gene Heskett <ghesk...@shentel.net> wrote: > > In the x86 version of man 9 motion, those are all there I believe. > > Yes. In my sim version on this base machine, only axis is listed, > > joint stuff hasn't jumped over the fence into the simulators, yet. > > In the arm version, the whole section on axis[X|Y|Z] etc has been > > expunged, and replaced with joint#'s and the axis stuffs are not > > even visible to a halmeter, or to halshow. > > It seems rather more likely that you simply aren't using the version > of LinuxCNC that you think you are.
On the G0704, which is x86; 2.8.0-pre1-2863-ga9120ef from its sources.list; deb http://buildbot.linuxcnc.org/ wheezy master-rt On the pi; 2.8.0-pre1-2771-gdc2ff49 its sources.list entry; deb http://buildbot.linuxcnc.org/ jessie master-sim And on this machine running a sim; 2.7.8-49-g5ce3159 deb http://linuxcnc.org/ wheezy 2.7-uspace base 2.6 Neither of the x86 boxes have had a sources edit in about a year. Please show me any updated listings, bearing in mind that the pi is the only one running jessie, everything else is still on wheezy, but all are uptodate a/o this Friday past. Thanks Andy Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
