I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One of which seems to be locked into staying with it because of Hardware limitations (an ISA interface card). In the past week one of those machines started freezing up while running Linuxcnc. Fortunately it wasn't the machine that can't run on Wheezy, so yesterday in frustration I installed the Wheezy ISO in a separate partition and that seems to have stopped the problem. My other old installation is still working happily. One of the main differences between the two machines is the one that was acting up has a Gladevcp, and the one that is still working has a Pyvcp. Where should I start looking for debugging info, to help find what is going wrong on the one machine?
-- ======================================== Todd Zuercher mailto:zuerc...@embarqmail.com ======================================== ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
