On Sun, Apr 23, 2017 at 5:56 PM, Sebastian Kuzminsky <s...@highlab.com> wrote:
> This looks closer, the relevant part from the config.log is this:
>
> configure:8072: g++ -o conftest -g -O2 -std=c++11 -I/usr/include/python2.7
> conftest.cpp -lXinerama -lpython2.7 -lboost_python-py27 >&5
> /usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld:
> cannot find -lboost_python-py27 collect2: error: ld returned 1 exit status
>
> So it's looking for the correct library name now, and you said earlier you
> have it here:
>
> /usr/lib64/libboost_python-2.7.so
Yep that file is there.
> So try adding LDFLAGS=-L/usr/lib64, either as an environment variable or via
> the configure flag.
I tried this...
./configure --without-libmodbus --with-realtime=uspace
--with-python=/usr/bin/python2.7 --with-boost-python
LDFLAGS=-L/usr/lib/64
and later this for good measure...
export LDFLAGS=-L/usr/lib64
Sadly I still get this...
checking for xgettext tcl bug... xgettext version 0.19.7 OK
checking for msgfmt... /usr/bin/msgfmt
checking for --tcl support in msgfmt... yes
checking for Python support... yes
checking python version... OK
checking version of python libraries... python2.7
checking match between tk and Tkinter versions... 8.5
checking location of Python header files... /usr/include/python2.7
checking for Python headers... -I/usr/include/python2.7
checking for Python libraries... -lpthread -ldl -lutil
checking whether the Boost::Python headers are available... yes
checking for boost::python shared library...
configure: error: boost::python is required to build LinuxCNC
attached is the config.log
based on what you said I found this....
configure:8072: g++ -o conftest -g -O2 -std=c++11
-I/usr/include/python2.7 -L/usr/lib/64 conftest.cpp -lXinerama
-lpython2.7 -lboost_python-yes >&5
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld:
cannot find -lboost_python-yes
collect2: error: ld returned 1 exit status
which makes me wonder if my copy of boost is broken or something?! I
am looking for a simple way to test it.
>
> On April 23, 2017 11:08:33 AM MDT, Evan Foss <evanf...@gmail.com> wrote:
>>
>> On Sun, Apr 23, 2017 at 2:55 PM, Sebastian Kuzminsky <s...@highlab.com>
>> wrote:
>>>
>>> On 04/22/2017 09:25 PM, Evan Foss wrote:
>>>>
>>>> On Sat, Apr 22, 2017 at 1:56 PM, Sebastian Kuzminsky <s...@highlab.com>
>>>> wrote:
>>>>>>>
>>>>>>> From the configure --help output:
>>>>>>>
>>>>>>>> --with-boost-python Specify the boost python shared library
>>>>>>>> to use. For
>>>>>>>> instance,
>>>>>>>> --with-boost-python=boost_python-py25.
>>>>>>>> Defaults to boost-python. If you use this
>>>>>>>> then you
>>>>>>>> should probably set PYTHON too, to avoid
>>>>>>>> using
>>>>>>>> multiple python versions.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> I tried adding --with-boost-python=boost_python-py27 it didn't help.
>>>
>>>
>>> I've led you astray. But in my defense, that --help output led *me*
>>> astray.
>>>
>>> Our configure script actually wants just this:
>>>
>>> --with-boost-python=py27
>>>
>>> Try that, and if it works like I think it will, I'll update the --help
>>> info.
>>
>>
>> I tried the following line.
>> ./configure --enable-non-distributable=yes --without-libmodbus
>> --prefix=/home/user1/programs/linuxcnc --with-realtime=uspace
>> --with-python=/usr/bin/python2.7 --with-boost-python=py27
>>
>> and this is the end of the output. (config.log attached)
>> ....
>> checking for msgfmt... /usr/bin/msgfmt
>> checking for --tcl support in msgfmt... yes
>> checking for Python support... yes
>> checking python version... OK
>> checking version of python libraries... python2.7
>> checking match between tk and Tkinter versions... 8.5
>> checking location of Python header files... /usr/include/python2.7
>> checking for Python headers... -I/usr/include/python2.7
>> checking for Python libraries... -lpthread -ldl -lutil
>> checking whether the Boost::Python headers are available... yes
>> checking for boost::python shared library...
>> configure: error: boost::python is required to build LinuxCNC
>>
>>
>>
>>> --
>>> Sebastian Kuzminsky
>>>
>>> ________________________________
>>>
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> ________________________________
>>>
>>> Emc-users mailing list
>>> Emc-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>>
>>
>
> --
> Sebastian Kuzminsky
--
Home
http://evanfoss.googlepages.com/
Work
http://forge.abcd.harvard.edu/gf/project/epl_engineering/wiki/
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2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=Ta4p
-----END PGP PUBLIC KEY BLOCK-----
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by LinuxCNC configure 2.7.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --without-libmodbus --with-realtime=uspace
--with-python=/usr/bin/python2.7 --with-boost-python LDFLAGS=-L/usr/lib/64
## --------- ##
## Platform. ##
## --------- ##
hostname = turingatlarge
uname -m = x86_64
uname -r = 4.9.16-gentoo
uname -s = Linux
uname -v = #2 SMP Sun Apr 2 02:22:32 UTC 2017
/usr/bin/uname -p = Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/user1/programs/pcb-rnd-svn/bin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /opt/bin
PATH: /usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3
PATH: /usr/lib64/opencascade-6.7.1/ros/lin/bin
PATH: /usr/games/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2387: checking build toplevel
configure:2390: result: /home/user1/Documents/build/linuxcnc-dev
configure:2399: checking installation prefix
configure:2403: result: run in place
configure:2426: checking for grep
configure:2444: found /bin/grep
configure:2456: result: /bin/grep
configure:2466: checking for egrep
configure:2484: found /bin/egrep
configure:2496: result: /bin/egrep
configure:2513: checking for RT dir
configure:2573: result: Using userspace realtime
configure:2576: checking whether to enable userspace PCI access
configure:2597: result: yes
configure:2602: checking for libudev
configure:2606: result: yes - version 225
configure:2739: checking for cc version
configure:2747: result: not specified
configure:2805: checking for gcc
configure:2821: found /usr/bin/gcc
configure:2832: result: gcc
configure:2863: checking for C compiler version
configure:2872: gcc --version >&5
gcc (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) 4.7.3
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2883: $? = 0
configure:2872: gcc -v >&5
Using built-in specs.
COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3/gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/4.7.3/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with:
/var/tmp/portage/sys-devel/gcc-4.7.3-r1/work/gcc-4.7.3/configure
--host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr
--bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3
--includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include
--datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3
--mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man
--infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info
--with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include/g++-v4
--with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/python
--enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt
--disable-werror --with-system-zlib --enable-nls --without-included-gettext
--enable-checking=release --with-bugurl=https://bugs.gentoo.org/
--with-pkgversion='Gentoo 4.7.3-r1 p1.4, pie-0.5.5' --enable-libstdcxx-time
--enable-shared --enable-threads=posix --enable-__cxa_atexit
--enable-clocale=gnu --enable-multilib --with-multilib-list=m32,m64
--disable-altivec --disable-fixed-point --enable-targets=all --disable-libgcj
--enable-libgomp --disable-libmudflap --disable-libssp --enable-lto
--without-cloog --without-ppl
Thread model: posix
gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5)
configure:2883: $? = 0
configure:2872: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2883: $? = 1
configure:2872: gcc -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:2883: $? = 1
configure:2903: checking whether the C compiler works
configure:2925: gcc -L/usr/lib/64 conftest.c >&5
configure:2929: $? = 0
configure:2977: result: yes
configure:2980: checking for C compiler default output file name
configure:2982: result: a.out
configure:2988: checking for suffix of executables
configure:2995: gcc -o conftest -L/usr/lib/64 conftest.c >&5
configure:2999: $? = 0
configure:3021: result:
configure:3043: checking whether we are cross compiling
configure:3051: gcc -o conftest -L/usr/lib/64 conftest.c >&5
configure:3055: $? = 0
configure:3062: ./conftest
configure:3066: $? = 0
configure:3081: result: no
configure:3086: checking for suffix of object files
configure:3108: gcc -c conftest.c >&5
configure:3112: $? = 0
configure:3133: result: o
configure:3137: checking whether we are using the GNU C compiler
configure:3156: gcc -c conftest.c >&5
configure:3156: $? = 0
configure:3165: result: yes
configure:3174: checking whether gcc accepts -g
configure:3194: gcc -c -g conftest.c >&5
configure:3194: $? = 0
configure:3235: result: yes
configure:3252: checking for gcc option to accept ISO C89
configure:3315: gcc -c -g -O2 conftest.c >&5
configure:3315: $? = 0
configure:3328: result: none needed
configure:3353: checking how to run the C preprocessor
configure:3384: gcc -E conftest.c
configure:3384: $? = 0
configure:3398: gcc -E conftest.c
conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:3398: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3423: result: gcc -E
configure:3443: gcc -E conftest.c
configure:3443: $? = 0
configure:3457: gcc -E conftest.c
conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:3457: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3492: checking for usability of rdtscll from asm/msr.h
configure:3510: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
/tmp/cc9UXNYB.o: In function `use_rdtscll':
/home/user1/Documents/build/linuxcnc-dev/src/conftest.c:14: undefined reference
to `rdtscll'
collect2: error: ld returned 1 exit status
configure:3510: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| /* end confdefs.h. */
|
| #include <asm/msr.h>
| #include <stdio.h>
| void use_rdtscll(void) { long long tsc; rdtscll(tsc); }
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3522: result: no
configure:3525: checking for usability of linux/hidraw.h
configure:3542: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
configure:3542: $? = 0
configure:3554: result: yes
configure:3618: checking for libusb-1.0
configure:3621: result: yes
configure:3741: checking for module installation directory
configure:3770: result: configuring for run-in-place
configure:3775: result: /home/user1/Documents/build/linuxcnc-dev/rtlib
configure:3932: checking for glib
configure:3936: result: yes - 2.46.2
configure:3961: checking for GTK 2.4.0 or above
configure:3965: result: yes - 2.24.29
configure:3969: checking for libgnomeprintui-2.2
configure:3978: result: no -- printing from classicladder will not be possible
configure:4062: checking for g++
configure:4078: found /usr/bin/g++
configure:4089: result: g++
configure:4116: checking for C++ compiler version
configure:4125: g++ --version >&5
g++ (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) 4.7.3
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4136: $? = 0
configure:4125: g++ -v >&5
Using built-in specs.
COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3/g++
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/4.7.3/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with:
/var/tmp/portage/sys-devel/gcc-4.7.3-r1/work/gcc-4.7.3/configure
--host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr
--bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3
--includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include
--datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3
--mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man
--infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info
--with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/include/g++-v4
--with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/python
--enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt
--disable-werror --with-system-zlib --enable-nls --without-included-gettext
--enable-checking=release --with-bugurl=https://bugs.gentoo.org/
--with-pkgversion='Gentoo 4.7.3-r1 p1.4, pie-0.5.5' --enable-libstdcxx-time
--enable-shared --enable-threads=posix --enable-__cxa_atexit
--enable-clocale=gnu --enable-multilib --with-multilib-list=m32,m64
--disable-altivec --disable-fixed-point --enable-targets=all --disable-libgcj
--enable-libgomp --disable-libmudflap --disable-libssp --enable-lto
--without-cloog --without-ppl
Thread model: posix
gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5)
configure:4136: $? = 0
configure:4125: g++ -V >&5
g++: error: unrecognized command line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:4136: $? = 1
configure:4125: g++ -qversion >&5
g++: error: unrecognized command line option '-qversion'
g++: fatal error: no input files
compilation terminated.
configure:4136: $? = 1
configure:4140: checking whether we are using the GNU C++ compiler
configure:4159: g++ -c conftest.cpp >&5
configure:4159: $? = 0
configure:4168: result: yes
configure:4177: checking whether g++ accepts -g
configure:4197: g++ -c -g conftest.cpp >&5
configure:4197: $? = 0
configure:4238: result: yes
configure:4312: checking whether g++ supports C++11 features by default
configure:4338: g++ -c -g -O2 conftest.cpp >&5
conftest.cpp:31:21: error: expected identifier before 'sizeof'
conftest.cpp:31:21: error: expected ',' or '...' before 'sizeof'
conftest.cpp:31:63: error: ISO C++ forbids declaration of 'static_assert' with
no type [-fpermissive]
conftest.cpp:34:29: error: '>>' should be '> >' within a nested template
argument list
conftest.cpp:37:13: error: expected constructor, destructor, or type conversion
before '(' token
conftest.cpp:41:15: error: expected unqualified-id before '&&' token
conftest.cpp:43:10: error: 'd' does not name a type
configure:4338: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| #define HIDRAW_H_USABLE /**/
| #define HAVE_LIBUSB10 yes
| #define MODULE_EXT ".so"
| #define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
| #define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
| #define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
| #define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
| #define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
| #define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
| #define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
| #define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
| #define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
| #define EMC2_CONFIG_DIR ""
| #define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
| #define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
| #define PRELOAD_WORKAROUND ""
| /* end confdefs.h. */
|
| template <typename T>
| struct check
| {
| static_assert(sizeof(int) <= sizeof(T), "not big enough");
| };
|
| typedef check<check<bool>> right_angle_brackets;
|
| int a;
| decltype(a) b;
|
| typedef check<int> check_type;
| check_type c;
| check_type&& cr = static_cast<check_type&&>(c);
|
| auto d = a;
|
configure:4345: result: no
configure:4356: checking whether g++ supports C++11 features with -std=c++11
configure:4384: g++ -c -g -O2 -std=c++11 conftest.cpp >&5
configure:4384: $? = 0
configure:4393: result: yes
configure:4428: checking whether make sets $(MAKE)
configure:4450: result: yes
configure:4502: checking for ranlib
configure:4518: found /usr/bin/ranlib
configure:4529: result: ranlib
configure:4553: checking for ar
configure:4571: found /usr/bin/ar
configure:4583: result: /usr/bin/ar
configure:4593: checking for install
configure:4611: found /usr/bin/install
configure:4623: result: /usr/bin/install
configure:4634: checking for sed
configure:4652: found /bin/sed
configure:4665: result: /bin/sed
configure:4680: checking for ps
configure:4698: found /bin/ps
configure:4711: result: /bin/ps
configure:4726: checking for kill
configure:4744: found /bin/kill
configure:4757: result: /bin/kill
configure:4772: checking for whoami
configure:4790: found /usr/bin/whoami
configure:4803: result: /usr/bin/whoami
configure:4818: checking for awk
configure:4836: found /usr/bin/awk
configure:4849: result: /usr/bin/awk
configure:4864: checking for insmod
configure:4882: found /sbin/insmod
configure:4895: result: /sbin/insmod
configure:4910: checking for rmmod
configure:4928: found /sbin/rmmod
configure:4941: result: /sbin/rmmod
configure:4956: checking for lsmod
configure:4974: found /bin/lsmod
configure:4987: result: /bin/lsmod
configure:5002: checking for pidof
configure:5020: found /usr/bin/pidof
configure:5033: result: /usr/bin/pidof
configure:5048: checking for ipcs
configure:5066: found /usr/bin/ipcs
configure:5079: result: /usr/bin/ipcs
configure:5094: checking for fuser
configure:5112: found /bin/fuser
configure:5125: result: /bin/fuser
configure:5141: checking for mandb
configure:5159: found /usr/bin/mandb
configure:5172: result: /usr/bin/mandb
configure:5246: checking for /usr/bin/python2.7
configure:5277: result: /usr/bin/python2.7
configure:5290: checking whether to build documentation
configure:5327: result: no
configure:5901: checking for grep that handles long lines and -e
configure:5959: result: /bin/grep
configure:5964: checking for egrep
configure:6026: result: /bin/egrep
configure:6031: checking for ANSI C header files
configure:6051: gcc -c -g -O2 conftest.c >&5
configure:6051: $? = 0
configure:6124: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
configure:6124: $? = 0
configure:6124: ./conftest
configure:6124: $? = 0
configure:6135: result: yes
configure:6143: checking for sys/wait.h that is POSIX.1 compatible
configure:6169: gcc -c -g -O2 conftest.c >&5
configure:6169: $? = 0
configure:6176: result: yes
configure:6186: checking for semtimedop
configure:6186: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
configure:6186: $? = 0
configure:6186: result: yes
configure:6198: checking for sincos function
configure:6212: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lm >&5
conftest.c: In function 'main':
conftest.c:35:1: warning: incompatible implicit declaration of built-in
function 'sincos' [enabled by default]
configure:6212: $? = 0
configure:6222: result: yes
configure:6227: checking for __sincos
configure:6227: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lm >&5
/tmp/ccu96990.o: In function `main':
/home/user1/Documents/build/linuxcnc-dev/src/conftest.c:66: undefined reference
to `__sincos'
collect2: error: ld returned 1 exit status
configure:6227: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| #define HIDRAW_H_USABLE /**/
| #define HAVE_LIBUSB10 yes
| #define MODULE_EXT ".so"
| #define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
| #define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
| #define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
| #define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
| #define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
| #define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
| #define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
| #define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
| #define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
| #define EMC2_CONFIG_DIR ""
| #define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
| #define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
| #define PRELOAD_WORKAROUND ""
| #define HAVE_CXX11 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SEMTIMEDOP 1
| #define HAVE_SINCOS 1
| /* end confdefs.h. */
| /* Define __sincos to an innocuous variant, in case <limits.h> declares
__sincos.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define __sincos innocuous___sincos
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char __sincos (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef __sincos
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char __sincos ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined __stub___sincos || defined __stub_____sincos
| choke me
| #endif
|
| int
| main ()
| {
| return __sincos ();
| ;
| return 0;
| }
configure:6227: result: no
configure:6247: checking for tcl
configure:6366: result: /usr/lib64/tclConfig.sh found
configure:6373: checking for tk
configure:6480: result: /usr/lib64/tkConfig.sh found
configure:6516: checking whether to check for runtime dependencies
configure:6518: result: yes
configure:6522: checking for BWidget using /usr/bin/tclsh8.5
configure:6525: result: found
configure:6534: checking for BLT using tclsh8.5
configure:6537: result: found
configure:6544: checking for img::png using /usr/bin/tclsh8.5
configure:6547: result: found
configure:6557: checking for tclX using /usr/bin/tclsh8.5
configure:6560: result: found
configure:6589: checking for X
configure:6728: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lX11 >&5
configure:6728: $? = 0
configure:6778: result: libraries , headers
configure:6877: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lX11 >&5
configure:6877: $? = 0
configure:6975: checking for gethostbyname
configure:6975: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
configure:6975: $? = 0
configure:6975: result: yes
configure:7072: checking for connect
configure:7072: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
configure:7072: $? = 0
configure:7072: result: yes
configure:7121: checking for remove
configure:7121: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
configure:7121: $? = 0
configure:7121: result: yes
configure:7170: checking for shmat
configure:7170: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c >&5
configure:7170: $? = 0
configure:7170: result: yes
configure:7228: checking for IceConnectionNumber in -lICE
configure:7253: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lICE >&5
configure:7253: $? = 0
configure:7262: result: yes
configure:7280: checking X11/extensions/Xinerama.h usability
configure:7280: gcc -c -g -O2 conftest.c >&5
configure:7280: $? = 0
configure:7280: result: yes
configure:7280: checking X11/extensions/Xinerama.h presence
configure:7280: gcc -E conftest.c
configure:7280: $? = 0
configure:7280: result: yes
configure:7280: checking for X11/extensions/Xinerama.h
configure:7280: result: yes
configure:7293: checking for XineramaQueryExtension in -lXinerama
configure:7318: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lXinerama
>&5
configure:7318: $? = 0
configure:7327: result: yes
configure:7355: checking for X11/Xaw/XawInit.h
configure:7355: gcc -c -g -O2 conftest.c >&5
configure:7355: $? = 0
configure:7355: result: yes
configure:7370: checking for XawDialogGetValueString in -lXaw
configure:7395: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lXaw
-lXinerama -lSM -lICE >&5
configure:7395: $? = 0
configure:7404: result: yes
configure:7437: checking readline/readline.h usability
configure:7437: gcc -c -g -O2 conftest.c >&5
configure:7437: $? = 0
configure:7437: result: yes
configure:7437: checking readline/readline.h presence
configure:7437: gcc -E conftest.c
configure:7437: $? = 0
configure:7437: result: yes
configure:7437: checking for readline/readline.h
configure:7437: result: yes
configure:7451: checking readline/history.h usability
configure:7451: gcc -c -g -O2 conftest.c >&5
configure:7451: $? = 0
configure:7451: result: yes
configure:7451: checking readline/history.h presence
configure:7451: gcc -E conftest.c
configure:7451: $? = 0
configure:7451: result: yes
configure:7451: checking for readline/history.h
configure:7451: result: yes
configure:7465: checking for readline in -lreadline
configure:7490: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lreadline
>&5
configure:7490: $? = 0
configure:7499: result: yes
configure:7507: checking for readline in -lreadline
configure:7532: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lreadline
-ltermcap >&5
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld:
cannot find -ltermcap
collect2: error: ld returned 1 exit status
configure:7532: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| #define HIDRAW_H_USABLE /**/
| #define HAVE_LIBUSB10 yes
| #define MODULE_EXT ".so"
| #define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
| #define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
| #define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
| #define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
| #define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
| #define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
| #define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
| #define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
| #define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
| #define EMC2_CONFIG_DIR ""
| #define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
| #define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
| #define PRELOAD_WORKAROUND ""
| #define HAVE_CXX11 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SEMTIMEDOP 1
| #define HAVE_SINCOS 1
| #define HAVE_X11_EXTENSIONS_XINERAMA_H 1
| #define HAVE_LIBXINERAMA 1
| #define HAVE_X11_XAW_XAWINIT_H 1
| #define HAVE_LIBXAW 1
| #define HAVE_READLINE_READLINE_H 1
| #define HAVE_READLINE_HISTORY_H 1
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char readline ();
| int
| main ()
| {
| return readline ();
| ;
| return 0;
| }
configure:7541: result: no
configure:7574: checking ncurses.h usability
configure:7574: gcc -c -g -O2 conftest.c >&5
configure:7574: $? = 0
configure:7574: result: yes
configure:7574: checking ncurses.h presence
configure:7574: gcc -E conftest.c
configure:7574: $? = 0
configure:7574: result: yes
configure:7574: checking for ncurses.h
configure:7574: result: yes
configure:7587: checking for initscr in -lncurses
configure:7612: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lncurses >&5
configure:7612: $? = 0
configure:7621: result: yes
configure:7666: checking locale.h usability
configure:7666: gcc -c -g -O2 conftest.c >&5
configure:7666: $? = 0
configure:7666: result: yes
configure:7666: checking locale.h presence
configure:7666: gcc -E conftest.c
configure:7666: $? = 0
configure:7666: result: yes
configure:7666: checking for locale.h
configure:7666: result: yes
configure:7678: checking for setlocale
configure:7678: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lncurses >&5
configure:7678: $? = 0
configure:7678: result: yes
configure:7695: checking libintl.h usability
configure:7695: gcc -c -g -O2 conftest.c >&5
configure:7695: $? = 0
configure:7695: result: yes
configure:7695: checking libintl.h presence
configure:7695: gcc -E conftest.c
configure:7695: $? = 0
configure:7695: result: yes
configure:7695: checking for libintl.h
configure:7695: result: yes
configure:7705: checking for gettext in -lintl
configure:7730: gcc -o conftest -g -O2 -L/usr/lib/64 conftest.c -lintl
-lncurses >&5
conftest.c:51:6: warning: conflicting types for built-in function 'gettext'
[enabled by default]
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld:
cannot find -lintl
collect2: error: ld returned 1 exit status
configure:7730: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| #define HIDRAW_H_USABLE /**/
| #define HAVE_LIBUSB10 yes
| #define MODULE_EXT ".so"
| #define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
| #define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
| #define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
| #define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
| #define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
| #define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
| #define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
| #define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
| #define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
| #define EMC2_CONFIG_DIR ""
| #define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
| #define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
| #define PRELOAD_WORKAROUND ""
| #define HAVE_CXX11 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SEMTIMEDOP 1
| #define HAVE_SINCOS 1
| #define HAVE_X11_EXTENSIONS_XINERAMA_H 1
| #define HAVE_LIBXINERAMA 1
| #define HAVE_X11_XAW_XAWINIT_H 1
| #define HAVE_LIBXAW 1
| #define HAVE_READLINE_READLINE_H 1
| #define HAVE_READLINE_HISTORY_H 1
| #define HAVE_READLINE /**/
| #define HAVE_NCURSES_H 1
| #define HAVE_LIBNCURSES 1
| #define HAVE_LOCALE_H 1
| #define HAVE_SETLOCALE 1
| #define HAVE_LIBINTL_H 1
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char gettext ();
| int
| main ()
| {
| return gettext ();
| ;
| return 0;
| }
configure:7739: result: no
configure:7782: checking for xgettext
configure:7800: found /usr/bin/xgettext
configure:7813: result: /usr/bin/xgettext
configure:7825: checking for xgettext tcl bug
configure:7833: result: xgettext version 0.19.7 OK
configure:7845: checking for msgfmt
configure:7863: found /usr/bin/msgfmt
configure:7876: result: /usr/bin/msgfmt
configure:7887: checking for --tcl support in msgfmt
configure:7890: result: yes
configure:7898: checking for Python support
configure:7915: result: yes
configure:7923: checking python version
configure:7929: result: OK
configure:7932: checking version of python libraries
configure:7935: result: python2.7
configure:7938: checking match between tk and Tkinter versions
configure:7955: result: 8.5
configure:7958: checking location of Python header files
configure:7961: result: /usr/include/python2.7
configure:7964: checking for Python headers
configure:7978: result: -I/usr/include/python2.7
configure:7982: checking for Python libraries
configure:7992: result: -lpthread -ldl -lutil
configure:8012: checking whether the Boost::Python headers are available
configure:8032: g++ -c -g -O2 -std=c++11 -I/usr/include/python2.7 conftest.cpp
>&5
configure:8032: $? = 0
configure:8039: result: yes
configure:8055: checking for boost::python shared library
configure:8072: g++ -o conftest -g -O2 -std=c++11 -I/usr/include/python2.7
-L/usr/lib/64 conftest.cpp -lXinerama -lpython2.7 -lyes >&5
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld:
cannot find -lyes
collect2: error: ld returned 1 exit status
configure:8072: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| #define HIDRAW_H_USABLE /**/
| #define HAVE_LIBUSB10 yes
| #define MODULE_EXT ".so"
| #define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
| #define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
| #define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
| #define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
| #define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
| #define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
| #define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
| #define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
| #define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
| #define EMC2_CONFIG_DIR ""
| #define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
| #define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
| #define PRELOAD_WORKAROUND ""
| #define HAVE_CXX11 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SEMTIMEDOP 1
| #define HAVE_SINCOS 1
| #define HAVE_X11_EXTENSIONS_XINERAMA_H 1
| #define HAVE_LIBXINERAMA 1
| #define HAVE_X11_XAW_XAWINIT_H 1
| #define HAVE_LIBXAW 1
| #define HAVE_READLINE_READLINE_H 1
| #define HAVE_READLINE_HISTORY_H 1
| #define HAVE_READLINE /**/
| #define HAVE_NCURSES_H 1
| #define HAVE_LIBNCURSES 1
| #define HAVE_LOCALE_H 1
| #define HAVE_SETLOCALE 1
| #define HAVE_LIBINTL_H 1
| /* end confdefs.h. */
| #include <boost/python.hpp>
| int
| main ()
| {
| boost::python::object test_object;
| ;
| return 0;
| }
configure:8072: g++ -o conftest -g -O2 -std=c++11 -I/usr/include/python2.7
-L/usr/lib/64 conftest.cpp -lXinerama -lpython2.7 -lboost_python-yes >&5
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld:
cannot find -lboost_python-yes
collect2: error: ld returned 1 exit status
configure:8072: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| #define HIDRAW_H_USABLE /**/
| #define HAVE_LIBUSB10 yes
| #define MODULE_EXT ".so"
| #define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
| #define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
| #define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
| #define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
| #define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
| #define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
| #define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
| #define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
| #define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
| #define EMC2_CONFIG_DIR ""
| #define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
| #define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
| #define PRELOAD_WORKAROUND ""
| #define HAVE_CXX11 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SEMTIMEDOP 1
| #define HAVE_SINCOS 1
| #define HAVE_X11_EXTENSIONS_XINERAMA_H 1
| #define HAVE_LIBXINERAMA 1
| #define HAVE_X11_XAW_XAWINIT_H 1
| #define HAVE_LIBXAW 1
| #define HAVE_READLINE_READLINE_H 1
| #define HAVE_READLINE_HISTORY_H 1
| #define HAVE_READLINE /**/
| #define HAVE_NCURSES_H 1
| #define HAVE_LIBNCURSES 1
| #define HAVE_LOCALE_H 1
| #define HAVE_SETLOCALE 1
| #define HAVE_LIBINTL_H 1
| /* end confdefs.h. */
| #include <boost/python.hpp>
| int
| main ()
| {
| boost::python::object test_object;
| ;
| return 0;
| }
configure:8072: g++ -o conftest -g -O2 -std=c++11 -I/usr/include/python2.7
-L/usr/lib/64 conftest.cpp -lXinerama -lpython2.7 -lboost_python >&5
/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../x86_64-pc-linux-gnu/bin/ld:
cannot find -lboost_python
collect2: error: ld returned 1 exit status
configure:8072: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "LinuxCNC"
| #define PACKAGE_TARNAME "linuxcnc"
| #define PACKAGE_VERSION "2.7.0"
| #define PACKAGE_STRING "LinuxCNC 2.7.0"
| #define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
| #define PACKAGE_URL ""
| #define RTAPI_USPACE /**/
| #define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
| #define HIDRAW_H_USABLE /**/
| #define HAVE_LIBUSB10 yes
| #define MODULE_EXT ".so"
| #define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
| #define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
| #define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
| #define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
| #define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
| #define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
| #define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
| #define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
| #define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
| #define EMC2_CONFIG_DIR ""
| #define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
| #define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
| #define PRELOAD_WORKAROUND ""
| #define HAVE_CXX11 1
| #define STDC_HEADERS 1
| #define HAVE_SYS_WAIT_H 1
| #define HAVE_SEMTIMEDOP 1
| #define HAVE_SINCOS 1
| #define HAVE_X11_EXTENSIONS_XINERAMA_H 1
| #define HAVE_LIBXINERAMA 1
| #define HAVE_X11_XAW_XAWINIT_H 1
| #define HAVE_LIBXAW 1
| #define HAVE_READLINE_READLINE_H 1
| #define HAVE_READLINE_HISTORY_H 1
| #define HAVE_READLINE /**/
| #define HAVE_NCURSES_H 1
| #define HAVE_LIBNCURSES 1
| #define HAVE_LOCALE_H 1
| #define HAVE_SETLOCALE 1
| #define HAVE_LIBINTL_H 1
| /* end confdefs.h. */
| #include <boost/python.hpp>
| int
| main ()
| {
| boost::python::object test_object;
| ;
| return 0;
| }
configure:8083: result:
configure:8100: error: boost::python is required to build LinuxCNC
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_boost_python=yes
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-L/usr/lib/64
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_XMKMF_set=
ac_cv_env_XMKMF_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func___sincos=no
ac_cv_func_connect=yes
ac_cv_func_gethostbyname=yes
ac_cv_func_remove=yes
ac_cv_func_semtimedop=yes
ac_cv_func_setlocale=yes
ac_cv_func_shmat=yes
ac_cv_have_x='have_x=yes ac_x_includes='\'''\'' ac_x_libraries='\'''\'''
ac_cv_header_X11_Xaw_XawInit_h=yes
ac_cv_header_X11_extensions_Xinerama_h=yes
ac_cv_header_libintl_h=yes
ac_cv_header_locale_h=yes
ac_cv_header_ncurses_h=yes
ac_cv_header_readline_history_h=yes
ac_cv_header_readline_readline_h=yes
ac_cv_header_stdc=yes
ac_cv_header_sys_wait_h=yes
ac_cv_lib_ICE_IceConnectionNumber=yes
ac_cv_lib_Xaw_XawDialogGetValueString=yes
ac_cv_lib_Xinerama_XineramaQueryExtension=yes
ac_cv_lib_intl_gettext=no
ac_cv_lib_ncurses_initscr=yes
ac_cv_objext=o
ac_cv_path_AR=/usr/bin/ar
ac_cv_path_AWK=/usr/bin/awk
ac_cv_path_EGREP=/bin/egrep
ac_cv_path_FUSER=/bin/fuser
ac_cv_path_GREP=/bin/grep
ac_cv_path_INSMOD=/sbin/insmod
ac_cv_path_INSTALL=/usr/bin/install
ac_cv_path_IPCS=/usr/bin/ipcs
ac_cv_path_KILL=/bin/kill
ac_cv_path_LSMOD=/bin/lsmod
ac_cv_path_MANDB=/usr/bin/mandb
ac_cv_path_MSGFMT=/usr/bin/msgfmt
ac_cv_path_PIDOF=/usr/bin/pidof
ac_cv_path_PS=/bin/ps
ac_cv_path_PYTHON=/usr/bin/python2.7
ac_cv_path_RMMOD=/sbin/rmmod
ac_cv_path_SED=/bin/sed
ac_cv_path_WHOAMI=/usr/bin/whoami
ac_cv_path_XGETTEXT=/usr/bin/xgettext
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
ac_cv_prog_make_make_set=yes
ax_cv_cxx_compile_cxx11=no
ax_cv_cxx_compile_cxx11__std_cpp11=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
A2X=''
A2X_LATEX_ENCODING=''
AR='/usr/bin/ar'
ASCIIDOC=''
AUTODIRS=''
AWK='/usr/bin/awk'
BOOST_PYTHON_LIBS=''
BUILD_DOCS='no'
BUILD_DOCS_HTML=''
BUILD_DOCS_PDF=''
BUILD_PYTHON='yes'
BUILD_SYS='uspace'
BUILD_UDEV='yes'
CC='gcc'
CFLAGS='-g -O2'
CONVERT=''
CPP='gcc -E'
CPPFLAGS=''
CXX='g++'
CXXFLAGS='-g -O2 -std=c++11'
DATE='Sun Apr 23 23:25:45 UTC 2017'
DBLATEX=''
DEFAULT_NMLFILE='/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml'
DEFS=''
DVIPNG=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/bin/egrep'
EMC2VERSION='2.7.0'
EMC2_BIN_DIR='/home/user1/Documents/build/linuxcnc-dev/bin'
EMC2_HELP_DIR='/home/user1/Documents/build/linuxcnc-dev/docs/help'
EMC2_HOME='/home/user1/Documents/build/linuxcnc-dev'
EMC2_ICON='/home/user1/Documents/build/linuxcnc-dev/linuxcncicon.png'
EMC2_IMAGE_DIR='/home/user1/Documents/build/linuxcnc-dev'
EMC2_LANG_DIR='/home/user1/Documents/build/linuxcnc-dev/src/objects'
EMC2_LATENCY_SCRIPT='/home/user1/Documents/build/linuxcnc-dev/scripts/latency-test'
EMC2_NCFILES_DIR='/home/user1/Documents/build/linuxcnc-dev/nc_files'
EMC2_RTLIB_DIR='/home/user1/Documents/build/linuxcnc-dev/rtlib'
EMC2_SCRIPT='/home/user1/Documents/build/linuxcnc-dev/scripts/linuxcnc'
EMC2_SUFFIX=' (run-in-place)'
EMC2_TCL_DIR='/home/user1/Documents/build/linuxcnc-dev/tcl'
EMC2_TCL_LIB_DIR='/home/user1/Documents/build/linuxcnc-dev/tcl'
EXEEXT=''
EXT_RTFLAGS=''
FUSER='/bin/fuser'
GLIB_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include '
GLIB_LIBS='-lglib-2.0 '
GREP='/bin/grep'
GS=''
GTK_CFLAGS='-pthread -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include
-I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo
-I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0
-I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/harfbuzz
-I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include
-I/usr/include/freetype2 '
GTK_LIBS='-lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo
-lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0
-lfontconfig -lfreetype '
GTK_VER='2.24.29'
HALLIB_DIR='/home/user1/Documents/build/linuxcnc-dev/lib/hallib'
HAVE_CXX11='1'
HAVE_GNOMEPRINT=''
HAVE_LIBINTL=''
HAVE_LIBINTL_H=''
HAVE_LIBMODBUS3=''
HAVE_LIBUSB10='yes'
HAVE_LOCALE_H=''
HAVE_NCURSES='yes'
HAVE_READLINE='yes'
HAVE_XAW='yes'
HIDRAW_H_USABLE='yes'
INCLUDEPY='/usr/include/python2.7'
INSMOD='/home/user1/Documents/build/linuxcnc-dev/bin/linuxcnc_module_helper
insert'
INSTALL='/usr/bin/install'
IPCS='/usr/bin/ipcs'
KERNELDIR=''
KERNEL_VERS=''
KILL='/bin/kill'
LANGUAGES=''
LDFLAGS='-L/usr/lib/64'
LIBMODBUS_CFLAGS=''
LIBMODBUS_LIBS=''
LIBOBJS=''
LIBPYTHON='python2.7'
LIBS=' -lXinerama '
LIBUDEV_CFLAGS=''
LIBUDEV_LIBS='-ludev '
LIBUSB10_CFLAGS='-I/usr/include/libusb-1.0 '
LIBUSB10_LIBS='-lusb-1.0 '
LINUXCNC_CONFIG_PATH='~/linuxcnc/configs:/home/user1/Documents/build/linuxcnc-dev/configs'
LOCALEDIR='/usr/share/locale'
LSMOD='/bin/lsmod'
LTLIBOBJS=''
MANDB='/usr/bin/mandb'
MODEXT='.so'
MODPATH_adeos=''
MODPATH_rtai_fifos=''
MODPATH_rtai_hal=''
MODPATH_rtai_ksched=''
MODPATH_rtai_math=''
MODPATH_rtai_sem=''
MODPATH_rtai_shm=''
MODULE_DIR='/home/user1/Documents/build/linuxcnc-dev/lib/linuxcnc/modules'
MSGFMT='/usr/bin/msgfmt'
NCURSES_LIBS='-lncurses'
OBJEXT='o'
PACKAGE='linuxcnc'
PACKAGE_BUGREPORT='emc-develop...@lists.sourceforge.net'
PACKAGE_NAME='LinuxCNC'
PACKAGE_STRING='LinuxCNC 2.7.0'
PACKAGE_TARNAME='linuxcnc'
PACKAGE_URL=''
PACKAGE_VERSION='2.7.0'
PATH_SEPARATOR=':'
PDFLATEX=''
PIDOF='/usr/bin/pidof'
PRELOAD_WORKAROUND=''
PS='/bin/ps'
PYTHON='/usr/bin/python2.7'
PYTHON_CPPFLAGS='-I/usr/include/python2.7'
PYTHON_LIBS='-lpthread -ldl -lutil'
RANLIB='ranlib'
READLINE_LIBS='-lreadline'
REALTIME='/home/user1/Documents/build/linuxcnc-dev/scripts/realtime'
RIP_MODULE_DIR='/home/user1/Documents/build/linuxcnc-dev/rtlib'
RMMOD='/home/user1/Documents/build/linuxcnc-dev/bin/linuxcnc_module_helper
remove'
RTAI=''
RTARCH='x86_64'
RTDIR='/home/user1/Documents/build/linuxcnc-dev/src'
RTFLAGS='-DUSPACE'
RTNAME=''
RTPREFIX='uspace'
RTS='uspace'
RUN_IN_PLACE='yes'
SED='/bin/sed'
SET_MAKE=''
SHELL='/bin/sh'
SITEPY=''
SOURCE_HIGHLIGHT=''
TCLSH='/usr/bin/tclsh8.5'
TCL_CFLAGS='-I/usr/include -DUSE_TCL_STUBS'
TCL_DBGX=''
TCL_LIBS='-ltclstub8.5'
TK_CFLAGS='-I/usr/include '
TK_DBGX=''
TK_LIBS='-lX11 -lXss -lXext -lXft -lfreetype -lfontconfig -ldl -lieee -lm
-ltk8.5'
USE_NLS='yes'
WHOAMI='/usr/bin/whoami'
WISH='/usr/bin/wish8.5'
XAW_LIBS=' -lSM -lICE -lX11 -lXaw -lXt'
XGETTEXT='/usr/bin/xgettext'
XMKMF=''
XSLTPROC=''
X_CFLAGS=''
X_EXTRA_LIBS=''
X_LIBS=''
X_PRE_LIBS=' -lSM -lICE'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
bindir='${exec_prefix}/bin'
build_alias=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host_alias=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/home/user1/Documents/build/linuxcnc-dev'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "LinuxCNC"
#define PACKAGE_TARNAME "linuxcnc"
#define PACKAGE_VERSION "2.7.0"
#define PACKAGE_STRING "LinuxCNC 2.7.0"
#define PACKAGE_BUGREPORT "emc-develop...@lists.sourceforge.net"
#define PACKAGE_URL ""
#define RTAPI_USPACE /**/
#define RTDIR "/home/user1/Documents/build/linuxcnc-dev/src"
#define HIDRAW_H_USABLE /**/
#define HAVE_LIBUSB10 yes
#define MODULE_EXT ".so"
#define EMC2_DEFAULT_NMLFILE
"/home/user1/Documents/build/linuxcnc-dev/configs/common/linuxcnc.nml"
#define EMC2_DEFAULT_TOOLTABLE
"/home/user1/Documents/build/linuxcnc-dev/configs/sim/sim.tbl"
#define EMC2_HOME "/home/user1/Documents/build/linuxcnc-dev"
#define EMC2_BIN_DIR "/home/user1/Documents/build/linuxcnc-dev/bin"
#define EMC2_TCL_DIR "/home/user1/Documents/build/linuxcnc-dev/tcl"
#define EMC2_HELP_DIR "/home/user1/Documents/build/linuxcnc-dev/docs/help"
#define EMC2_RTLIB_DIR "/home/user1/Documents/build/linuxcnc-dev/rtlib"
#define EMC2_LANG_DIR "/home/user1/Documents/build/linuxcnc-dev/src/objects"
#define EMC2_PO_DIR "/home/user1/Documents/build/linuxcnc-dev/share/locale"
#define EMC2_CONFIG_DIR ""
#define EMC2_NCFILES_DIR "/home/user1/Documents/build/linuxcnc-dev/nc_files"
#define EMC2_IMAGE_DIR "/home/user1/Documents/build/linuxcnc-dev"
#define PRELOAD_WORKAROUND ""
#define HAVE_CXX11 1
#define STDC_HEADERS 1
#define HAVE_SYS_WAIT_H 1
#define HAVE_SEMTIMEDOP 1
#define HAVE_SINCOS 1
#define HAVE_X11_EXTENSIONS_XINERAMA_H 1
#define HAVE_LIBXINERAMA 1
#define HAVE_X11_XAW_XAWINIT_H 1
#define HAVE_LIBXAW 1
#define HAVE_READLINE_READLINE_H 1
#define HAVE_READLINE_HISTORY_H 1
#define HAVE_READLINE /**/
#define HAVE_NCURSES_H 1
#define HAVE_LIBNCURSES 1
#define HAVE_LOCALE_H 1
#define HAVE_SETLOCALE 1
#define HAVE_LIBINTL_H 1
configure: exit 1
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
