On Sun, May 7, 2017 at 1:09 PM, suavesteve <suavest...@hotmail.com> wrote:
> I've come across this earlier and had created a local patch,
Would you please dig that patch out and share it?
> Tested with both v3.0.6 and v3.1.4 (Latest Stable release)
>
Thanks!
>
> Philip
>
> Evan Foss <evanf...@gmail.com> writes:
>
>> Is anyone looking into this?
>>
>> On Thu, Apr 27, 2017 at 3:49 AM, Evan Foss <evanf...@gmail.com> wrote:
>>> On Wed, Apr 26, 2017 at 1:30 PM, Sebastian Kuzminsky <s...@highlab.com>
>>> wrote:
>>>> 2.7 should build anywhere the master branch (2.8-prerelease) builds, what
>>>> build error do you get?
>>>
>>> Attached are the configure and build runs. I tried playing with the
>>> --enable-non-distributable=yes option but it still lands on the same
>>> error.
>>> This is just the error extracted from the build.
>>>
>>> Compiling hal/user_comps/mb2hal/mb2hal.c
>>> hal/user_comps/mb2hal/mb2hal.c: In function ‘get_tx_connection’:
>>> hal/user_comps/mb2hal/mb2hal.c:362:5: warning: passing argument 2 of
>>> ‘modbus_set_response_timeout’ makes integer from pointer without a
>>> cast [enabled by default]
>>> In file included from hal/user_comps/mb2hal/mb2hal.h:18:0,
>>> from hal/user_comps/mb2hal/mb2hal.c:27:
>>> /usr/include/modbus/modbus.h:188:16: note: expected ‘uint32_t’ but
>>> argument is of type ‘struct timeval *’
>>> hal/user_comps/mb2hal/mb2hal.c:362:5: error: too few arguments to
>>> function ‘modbus_set_response_timeout’
>>> In file included from hal/user_comps/mb2hal/mb2hal.h:18:0,
>>> from hal/user_comps/mb2hal/mb2hal.c:27:
>>> /usr/include/modbus/modbus.h:188:16: note: declared here
>>> hal/user_comps/mb2hal/mb2hal.c:369:5: warning: passing argument 2 of
>>> ‘modbus_set_byte_timeout’ makes integer from pointer without a cast
>>> [enabled by default]
>>> In file included from hal/user_comps/mb2hal/mb2hal.h:18:0,
>>> from hal/user_comps/mb2hal/mb2hal.c:27:
>>> /usr/include/modbus/modbus.h:191:16: note: expected ‘uint32_t’ but
>>> argument is of type ‘struct timeval *’
>>> hal/user_comps/mb2hal/mb2hal.c:369:5: error: too few arguments to
>>> function ‘modbus_set_byte_timeout’
>>> In file included from hal/user_comps/mb2hal/mb2hal.h:18:0,
>>> from hal/user_comps/mb2hal/mb2hal.c:27:
>>> /usr/include/modbus/modbus.h:191:16: note: declared here
>>> make: *** [Makefile:211: objects/hal/user_comps/mb2hal/mb2hal.o] Error 1
>>>
>>>
>>>> And how does matter fail to run?
>>>
>>> 2.8-prerelease has some quirks you should know. (or perhaps i am miss using
>>> it)
>>> 1. It doesn't understand --prefix= as other packages seem too in my
>>> experience. When I went to do make install it complained about not
>>> having a DESTDIR so I added DESTDIR := / to the Makefile.
>>> 2. It doesn't understand that when --prefix= points to say
>>> /home/username/programs/whatever/ that it has to use the installers
>>> permission level. (it kept bugging me for root)
>>>
>>> I added the following to my .bashrc because it is not installed in /
>>> export PATH=/home/user1/programs/linuxcnc/bin:${PATH}
>>> export LD_LIBRARY_PATH=/home/user1/programs/linuxcnc/lib:$LD_LIBRARY_PATH
>>> export
>>> PKG_CONFIG_PATH=/home/user1/programs/linuxcnc/lib/pkgconfig:$PKG_CONFIG_PATH
>>>
>>> When I run this is what happens in the console. In the gui The
>>> LinuxCNC Configuration Selector CURRENT: axis.ini.
>>> I leave it on axis.ini and click Next. When it crashes.
>>>
>>> ~ $ linuxcnc
>>> LINUXCNC - 2.8.0~pre1
>>> Machine configuration directory is
>>> '/home/user1/programs/linuxcnc/share/doc/linuxcnc/examples/sample-configs/sim/axis'
>>> Machine configuration file is 'axis.ini'
>>> can't find package Linuxcnc
>>> while executing
>>> "package require Linuxcnc "
>>> (file
>>> "/home/user1/programs/linuxcnc/share/linuxcnc/hallib/check_config.tcl"
>>> line 83)
>>> check_config validation failed
>>> LinuxCNC terminated with an error. You can find more information in the
>>> log:
>>> /home/user1/linuxcnc_debug.txt
>>> and
>>> /home/user1/linuxcnc_print.txt
>>> as well as in the output of the shell command 'dmesg' and in the terminal
>>>
>>> I attached linuxcnc_print.txt but linuxcnc_debug.txt is empty (0 bytes).
>>>
>>> Thanks for the continued effort,
>>> Evan (and the rest of the pcb-rnd team)
>>>
>>>>
>>>> On April 25, 2017 7:01:29 PM MDT, Evan Foss <evanf...@gmail.com> wrote:
>>>>>
>>>>> On Mon, Apr 24, 2017 at 2:49 PM, Sebastian Kuzminsky <s...@highlab.com>
>>>>> wrote:
>>>>>>
>>>>>> On 04/23/2017 09:25 PM, Evan Foss wrote:
>>>>>>>
>>>>>>> Ok so I tried
>>>>>>> LDFLAGS=-L/usr/lib64 ./configure --without-libmodbus
>>>>>>> --with-realtime=uspace --with-python=/usr/bin/python2.7
>>>>>>> --with-boost-python=py27
>>>>>>> (all one line) and it still lands in the same failure. I attached the
>>>>>>> logfile
>>>>>>
>>>>>>
>>>>>> Chris Radek pointed out to me on IRC that i'd given you the wrong
>>>>>> boost-python library name. That command line is right except it should
>>>>>> be --with-boost-python=2.7, *not* =py2.7.
>>>>>
>>>>>
>>>>> You and Chris Radek ROCK! This worked past the configure stage but now
>>>>> i have a different problem...
>>>>> ./configure --enable-simulator --with-python=/usr/bin/python2.7
>>>>> --with-boost-python=2.7 --prefix=/home/user1/programs/linuxcnc
>>>>>
>>>>> Using release 2.7.8 the build fails. Using the current git head it
>>>>> builds but fails run. Which should I focus on?
>>>>>
>>>>>>
>>>>>> --
>>>>>> Sebastian Kuzminsky
>>>>>>
>>>>>> ________________________________
>>>>>>
>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>> ________________________________
>>>>>>
>>>>>> Emc-users mailing list
>>>>>> Emc-users@lists.sourceforge.net
>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> Sebastian Kuzminsky
>>>
>>>
>>>
>>> --
>>> Home
>>> http://evanfoss.googlepages.com/
>>> Work
>>> http://forge.abcd.harvard.edu/gf/project/epl_engineering/wiki/
>>>
>>> -----BEGIN PGP PUBLIC KEY BLOCK-----
>>> Version: GnuPG v2
>>>
>>> mQENBFYy4RYBCAC183JomLtbdAlcKiaPDoVHq52LDmVmH75aiEc69m7YxDt54/ai
>>> VtYCAobbGVIyn3Hlz3uhF6LnPl/6Lm1VdnCfpwu3KQhCO6ds10ow2C30X4ohCqOd
>>> hCVg5C+ILmQkEffFrFODy3ji+PYTF4pADvHCWsTMv0hf0llwFOJsBCK6cl02IffE
>>> JPqy4PjM1nZ9HpzT84JBaG/4OGvTZ8SQ2yFUl265jagvygPTf88H1xpZHH1r8dB1
>>> stjUHLmPH8AOyDgKxFchgGeDc3p/vJtgDDIXAFfDXG0NSRovLmtaQdGxe47Zf/go
>>> bXiEM7YL2WqQe5zfEA919JxkEwlDKYniOSVzABEBAAG0N0V2YW4gRm9zcyAoVGhp
>>> cyBpcyBteSBwdWJsaWMga2V5LikgPGV2YW5mb3NzQGdtYWlsLmNvbT6JATkEEwEC
>>> ACMFAlYy4RYCGwMHCwkIBwMCAQYVCAIJCgsEFgIDAQIeAQIXgAAKCRCIpQTcE8nN
>>> bbBaCACAm8pU5lG1ev2Fsw68Axtcl57SJrYieqX96c3YuYH9JpqMqJRnd9nDKw9X
>>> tQuvuH7tUk0VbOaDqReOYJVI/4c5wb9AaOFp6K2DUcupq6XhgXpvz3HzoPwjAdIj
>>> XuQzdRUx5+innTJrSkGuBYW/CZ2zqEx4xfLlq4rO0hoTUMR8QVp2cCrkw6BT0m86
>>> APIw/ZnjoxM8IEzr7MxfRIg3qpzrZk28rmhx+k78Jyk61UhwcCPGIm/pjUopTwYJ
>>> 3YBdRB2cYD2aN7A1JVf5cRmSQYooHBGpH0kYvomGk97PKqypVuJ7OpG9xM58wUcC
>>> qUVt9hKlePLzP8csYjt8onqI7qIIuQENBFYy4RYBCADlH8spG3WkCx62vB5mr5Z0
>>> SCDd/RcyA4A5y5EOj5KurQkrSWpgi9Ho1yKruMJ6blQR2qkc66KqH9pnXDm/ZI1M
>>> K/wdW3ngETxBmXoozzFMT89aEWIVR5/PFodWK1elekE9iJxACuR98Zg2QttTD3x8
>>> A9w8VEyMLOXcDTrPFpHegMKswFBg5iuMulAdXAoGejWTI3n+qKFpabHm2Lfs6wjk
>>> 5rjucpTdeFK6UeWF1xAvNxXibuu5BlGwv53930qIXRwO/Gn2Rh5DXWxKU2fEIme/
>>> xgQQmIsDeUoWbfybdjw/x7Q0LW4mINiLDQcGHHRQKFIxbAJCT3USPLGh5xwE9/Er
>>> ABEBAAGJAR8EGAECAAkFAlYy4RYCGwwACgkQiKUE3BPJzW0uYAf9Hf30n8tM3mR2
>>> Zo6ESE0ivgdgjaJtAWrBUx7JzAzPjBnBOlNnu5Y9lVEqetvUPH6e3PvaHYUuaUU8
>>> 0HwxuKBW9nUprgV6uIu1DZmlcp+SxpbuCy7RDpNocRLNWWFMaYYzznmTgfnTgD4D
>>> gCq8Mf1mcfrluTkOAo+QNqbMfl1GISClopRqxVuAo59ewgMnFujwgd8w12BwWl24
>>> CzqOs5HqcUslePj+LzcjSNgVCklYwKl+0dsb/fctMOCtHodwqm2CBJ+zydvNmYkD
>>> fxda/J91Z1xrah5ec++FL0L4vs+jCiIWJeupJFKlr1hCMZiiGH7W554loK5l4jv3
>>> EY347EidAw==
>>> =Ta4p
>>> -----END PGP PUBLIC KEY BLOCK-----
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Home
http://evanfoss.googlepages.com/
Work
http://forge.abcd.harvard.edu/gf/project/epl_engineering/wiki/
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2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=Ta4p
-----END PGP PUBLIC KEY BLOCK-----
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
