Greetings everybody; Trying to run linuxcnc with the was _working_ Sunday config files. The on-screen echo: pi@raspi:~/linuxcnc/configs/sheldon-lathe $ linuxcnc -l LINUXCNC - 2.8.0-pre1-2771-gdc2ff49 Machine configuration directory is '/home/pi/linuxcnc/configs/sheldon-lathe' Machine configuration file is '7i90-axis.ini' Starting LinuxCNC... Found file(REL): ./hm2-7i90-stepper.hal Note: Using POSIX realtime hm2: loading Mesa HostMot2 driver version 0.15 Unknown board: HOST???? hm2_rpspi: rtapi_app_main: Operation not permitted (-1) ./hm2-7i90-stepper.hal:32: waitpid failed /usr/bin/rtapi_app hm2_rpspi ./hm2-7i90-stepper.hal:32: /usr/bin/rtapi_app exited without becoming ready ./hm2-7i90-stepper.hal:32: insmod for hm2_rpspi failed, returned -1 Shutting down and cleaning up LinuxCNC...
HOST? I don't recall seeing that error before. Ideas? Stuff to check? Thanks. Its been a very looong day, starting with running up to staples & bringing home a pair of 32Gb PNY's that claimed 85 Mb/sec, but only did about 4.5 when writing the img file. I also picked up a usb hd, terabyte. By flipping a bit on in the OTG memory, the pi can be made to boot from most usb hd's. Its a one way bit flip though, that pi will never again boot from a u-sd card. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
