You are in right but today you can choice from many type of material ... 
someone works fine a cold.

For rude heated bed you can use heating cable and glass plane + some sort of 
hot hair shot ..... You can use your iso30/40 tolholder modified  for house a 
head ...

Any how milling machine is not the best choice .... at least your mill it 
should be able to run at 40mt/min ... better 70 ...


regards

giorgio


________________________________
Da: Gene Heskett <ghesk...@shentel.net>
Inviato: martedì 16 maggio 2017 15.27
A: Enhanced Machine Controller (EMC)
Oggetto: [Emc-users] new thread inspired by Christophers question about 3d 
printer sliceing SW.

Greetings all;

And the next logical question from me is:

Has anyone put a printhead on a std moving table milling machine, and
used it to do some 3d additive printing?  I am "out of room" for more
machines, and that seems like a possible to do project. Doing it well
would remain to be seen.

The printhead seems like the lessor of two aspects, as a heated bed that
big seems to be the bigger problem.

Discussion?

Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
[http://geneslinuxbox.net:6309/gene/pix/EasterSundayCropped2004-1.jpg]<http://geneslinuxbox.net:6309/gene>

Gene's Web pages<http://geneslinuxbox.net:6309/gene>
geneslinuxbox.net
Welcome to Gene's web pages. Here you will find some of the things that make me 
tick, and that help keep me out of the bars. That is me & the missus, Dee 
(Elladene) I ...



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Emc-users Info Page - 
SourceForge<https://lists.sourceforge.net/lists/listinfo/emc-users>
lists.sourceforge.net
This list is for users of the Enhanced Machine Controller (EMC). Topics include 
how to obtain, install, configure, and use EMC, as well as other general EMC 
related ...


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to