On Saturday 27 May 2017 13:53:51 Bertho Stultiens wrote: > On 05/27/2017 02:41 PM, Gene Heskett wrote: > [snip] > > > If I can rebuild just this module on the pi itself, that is TBD. > > Gene, can you specify which base-distro you run on the Pi and which > kernel? I'd like to reproduce your problem here on the bench and see > if I can hack a fix. > pi@pionsheldon:~ $ uname -a Linux pionsheldon 4.4.9-rt17-v7+ #1 SMP PREEMPT RT Wed May 11 22:46:14 CEST 2016 armv7l GNU/Linux
pi@pionsheldon:~ $ cat /etc/issue Raspbian GNU/Linux 8 \n \l > Also, what options do you have on the linuxcnc configure. Just to make > similar systems. the configure-$version number in /boot does not match the running kernel as this was an emlid based install, and the rt kernel has overwritten their 4.4.6 version kernel and kernel7 files. So although I had to install more utils, both pi's are pretty close to matching the above, with uname -a and /etc/issue being a 100% match. > I do not have the hm2 hardware, but that should not prevent me from > seeing the problem on the SPI bus. I think you'll have to have the hm2 hardware, although I'll be glad to be the lab rat if you want to PM me the newly built modules. I've been out shopping & pill collecting, and I've got to reload the dishwasher in order to find the sink, so I'll be busy for the next half hour at least. > > >>> What should I do next? > >> > >> Try and try again? > >> ;-) > > > > Thats not the smiley I'd use. > > Well, I'm still smiling, hope you are too. I am at the thought that you might build us a working driver. ;-) Thanks Bertho Stultiens. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
