You SHOULD see different results. On Jul 2, 2017 3:46 PM, <tom-...@bgp.nu> wrote:
> I don’t disagree but am failing to see the connection to my question…? > -Tom > > > On Jul 2, 2017, at 4:16 PM, Stuart Stevenson <stus...@gmail.com> wrote: > > > > It has always been my experience G40 cancels cutter compensation. > > > > On Jul 2, 2017 2:44 PM, <tom-...@bgp.nu> wrote: > > > > Why would G0 to a given location in one axis (X) differ such that a G1 > > movement in another axis (Z) causes the first axis to move? Let me > > explain... > > > > Attached is a screenshot of the back plot from Axis: > > http://bgp.nu/~tom/pub/G0G1.png > > > > The highlighted line is "G0 X#<CurrentDiameter>" > > > > However, if you look at the back plot that IS NOT the CurrentDiameter > value > > where it landed. It MIGHT be "CurrentDiameter - Cutter Compensation”. > > > > But then 2 lines down I move "G1 Z#<Z-Start>" and the line rises up to > > CurrentDiameter. That is, the move “G1 Z#<Z-Start>” is also causing a > > move in X to CurrentDiameter (when it should already be there - but > isn’t). > > Why is this? Why is the G0 move different from the G1 move? Or phrased > > another way, why is that first line at an angle rather than horizontal? > > > > According to the G-Code reference it appears both G1 and G0 are both > > affected by cutter compensation so they should be the same shouldn’t > they? > > > > -Tom > > > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------ > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
