A few weeks ago when I was having motion problems someone suggested I
check the supply voltage
to the encoder. It turns out to be 4.8 V. The power supply was an 85 w
pico , the little card that plugs
into the 24 pin power connector. Thinking that maybe I could do better
with a standard power supply
I swapped in a 300+ watt supply. Measured the encoder supply voltage and
it is 4.82 V.
System is using 5i20/7i33.
Is that voltage likely to cause problems?
TIA
Dave
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
