> A few weeks ago when I was having motion problems someone suggested I > check the supply voltage > to the encoder. It turns out to be 4.8 V. The power supply was an 85 w > pico , the little card that plugs > into the 24 pin power connector. Thinking that maybe I could do better > with a standard power supply > I swapped in a 300+ watt supply. Measured the encoder supply voltage and > it is 4.82 V. > System is using 5i20/7i33. > Is that voltage likely to cause problems? > TIA
It is supposed to be supplied with 5V, others are common. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users