Hi
using the machine today i noticed a little odd bug,
this only happens on a machine with random changer and non random does
not see this bug
when you abort a program with a pre called tool, and run press start
again, the machine will see first M6 and do a tool change regardless of
the first T word, see test program below
this happens on 2.7 and checked on pre2.8 still the same
run this problem
g91 g28 z0
t1 m6
t2 g90 g00 g43 h1 z100. (abort here or after it)
g04 p20.
g91 g28 z0
t2 m6
m30
if you run this program, abort on line 3 or after it, then resun it, the
tool will be changed for Tool 2
its like the precall takes priority , and line 2's T1 has no effect
untill M6 is carried out
on a non ramdon tool changer machine this bug is not seen running this
same program
maybe someone can check this, not sure where to look for this bug code wise
rob
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
