On Fri, 13 Oct 2017, andy pugh wrote:
Date: Fri, 13 Oct 2017 15:53:52 +0100
From: andy pugh <bodge...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] For Peter C. Wallace
On 13 October 2017 at 15:43, Gene Heskett <ghesk...@shentel.net> wrote:
Plugging a new(er, I don't recall if it was programmed) 5i25 card in,
dmesg says it found a xxxx:5125 card. Sounds like a blown pci bus line.
OTOH, TLMonster has a 5i25 in it, and it says its a 5125 too. And its
working ok. False Flag?
5125 is just a numerical version of 5i25 in a field which is numeric.
Doesn't look like it can be a single PCI line.
1 = 0011001
i = 01101001
I = 01001001
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
?? George Fitch, Atlanta Constitution Newspaper, 1916
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
The VID:DID for a 5I25 is
2718:5125
If you can read this its likely the PCI bus is OK
Another clue to PCI bus issues is if LinuxCNC doesnt find the correct
HM2 cookie =
0x55AACAFE
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
