On Saturday 14 October 2017 00:41:04 Jon Elson wrote: > > On Fri, Oct 13, 2017 at 7:43 AM, Gene Heskett <ghesk...@shentel.net> wrote: > >> Hi Peter; > >> Or alternatively, can this Dell's supposedly blown mobo be repaired > >> by replacing a known easily damaged part (that I've not found yet)? > > If the PS/2 ports stop working, it is very likely the 5V > fuse has been blown. Many mobos have thermal self-resetting > fuses there, you might try that first, just let the machine > cool for a few minutes and try with a different mouse/keyboard. > If not, inspect around the ports for a fuse component. Some > mobos use picofuses, look like 1/4 W resistors, but all green. > > Jon > I got that fixed Jon, I could put the mouses rx button in any machine and kill it. Mouse, button both went in the round file. And 2 brand new, psycho painted ones are now playing in the garage.
But now I can't make a g33.1 work in a peck routine. See my earlier post with the code that won't run. But I was running out of play time & had to go round up some dinner, so I turned stuff off including 95% of the lights & came in to take care of the missus. Tomorrow I'll try a different version of the code as I've made up a 1 pager for most of the common 'merican and metric sizes & tpi's. I just used a month ago, what s/b the same code set to do an 8mmx1.0, and it worked as expected around 24 times, in both steel and alu when I made the cat head and spiders for the Sheldon. Thanks and take care, Jon Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
