This does not have to be on a touch screen. It works on a conventional track pad. The problem is most trackpads or such incredibly low quality. Good ones are expensive. I use one of these daily: https://www.amazon.com/gp/product/B003XLYAWC/ref=ask_ql_qh_dp_hza
If you are a machinist they are interesting devices because they are milled from aluminum billets then sand blasted to remove the machine tool marks. The top surface is covered with a very thin 1mm layer of glass with a ground surface to remove "stickiness" Logitec also makes some but they cost more and are not as well made, just typical plastic trackpads. https://www.amazon.com/LOG910003057-Logitech-Wireless-Rechargeable-Touchpad/dp/B0093H4WT6/ref=pd_bxgy_147_2?_encoding=UTF8&psc=1&refRID=9D833CWHZAT0TGHYD86M&dpID=21pCaESx4OL&preST=_SX300_QL70_&dpSrc=detail On Thu, Nov 9, 2017 at 6:03 AM, bari <[email protected]> wrote: > Has anyone tried Touchegg with Linuxcnc and have any feedback on how > well it works? > > https://github.com/JoseExposito/touchegg > > https://www.youtube.com/watch?v=28Jjf5Ak6Q0 > > No deb package. Libs were written by Canonical. > > The last time we tried multitouch with LCNC every user eventually asked > for a keyboard and mouse. This was with a 23" LCD, so the problem wasn't > resolution or size of the buttons. > > -Bari > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
