On 12/04/2017 09:37 AM, 王若溪 wrote:
I'm writing some auto measurement G-code program using my CNC mill and a
touch probe.
Seems that LinuxCNC doesn't want to stop when the probe is tripped during a
non-probe move if the machine is running a G-code program.
Currently, I'm replacing every non-probe move with G38.3. After it's
execution, signal an error if the current position is not commanded
position (which indicates that the probe was tripped during this move),
continue if current position matches commanded.
Any thoughts?
We're currently discussing this issue here:
https://github.com/LinuxCNC/linuxcnc/issues/368
Please comment in that thread, describing your use case.
--
Sebastian Kuzminsky
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
