On 01/08/2018 12:40 PM, Gene Heskett wrote:
That version is incredibly ancient. That's pretty much a beta version
and close to 10 years old. Have you tried to get a newer version
through the software manager?
That is the newest version offered to a wheezy machine.
So it's an Ubuntu install then.
I've got it on a 10.04 LTS lcnc install and it works just fine. Must
be something you've done with that machine that breaks it. Which
wheezy? Ubuntu or Debian?
This is straight from the install image at linuxcnc.org. With lots of
additions because this machine is the doall machine. 100% updated 2 to
4x a week.
Then something is broken somewhere. There's no reason installing it
from the command line from the Calibre web site should croak and die
like it did, unless something is missing, turned off, or mangled in the
system. I've installed from the command line on 10.04, 12.04, 14.04 and
now 16.04.
What have you done with the system other than edit and change the lcnc
configuration files? It's quite possible if you were monkeying with
library files something got hosed or there are incompatible lib files on
the system that interact with programs like wget.
Calibre "Just Works", and has for the last 4 iterations of Ubuntu software.
Cheers, Gene Heskett
Mark
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
