On Tue, 24 Jul 2018, yomin estiven jaramillo munera wrote:
Date: Tue, 24 Jul 2018 16:18:25 -0500
From: yomin estiven jaramillo munera <yejm...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] parallel ports configuration
the daughter board is made by us, this is not of the firmware recommended
by mesa
OK so you could give me the pinout, and I can make a compatible bitfile or you
could download the Xilinx tools and the HostMot2 source and compile one
yourself (you need to make a pinout file that matches your hardware)
El mar., 24 de jul. de 2018 a la(s) 16:09, Peter C. Wallace (p...@mesanet.com)
escribi??:
On Tue, 24 Jul 2018, yomin estiven jaramillo munera wrote:
> Date: Tue, 24 Jul 2018 16:02:05 -0500
> From: yomin estiven jaramillo munera <yejm...@gmail.com>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] parallel ports configuration
>
> Hi, we have observed that we must configurate de firmware from xilinx is
this correct?, is there way of doing the configuration of the firmware of
another way?, is possible do it from pncconf?
Firmware is loaded with the utility "mesaflash" that loads bitfiles into
the
5I25s memory
The breakout board/daughterboard pinout is needed to determine the proper
firmware to load. This is why I asked about the breakout board you are
using.
El mar., 24 de jul. de 2018 a la(s) 15:37, yomin estiven jaramillo munera (
yejm...@gmail.com) escribi????:
> Debug file information:
> ./prueba.hal:51: parameter or pin 'hm2_5i25.0.stepgen.00.dirsetup' not
> found
> 6464
> PID TTY STAT TIME COMMAND
> Stopping realtime threads
> Unloading hal components
>
> El mar., 24 de jul. de 2018 a la(s) 15:10, Peter C. Wallace (
> p...@mesanet.com) escribi????:
>
>> On Tue, 24 Jul 2018, yomin estiven jaramillo munera wrote:
>>
>> > Date: Tue, 24 Jul 2018 15:02:31 -0500
>> > From: yomin estiven jaramillo munera <yejm...@gmail.com>
>> > Reply-To: "Enhanced Machine Controller (EMC)"
>> > <emc-users@lists.sourceforge.net>
>> > To: emc-users@lists.sourceforge.net
>> > Subject: Re: [Emc-users] parallel ports configuration
>> >
>> > Hi, i have problems for the pc recognize the card 5i25, i am trying to
>> >start from pncconf but when i execute linuxcnc, this sends me a error
>> which
>> >It seems to be card recognition, I am installing the card and
immediately
>> >making the configuration with pncconf, what am i not doing?
>>
>>
>> Can you copy the error message into a email?
>>
>>
>>
>> Peter Wallace
>> Mesa Electronics
>>
>>
>>
>>
>>
------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
