Why not model it in Fusion 360? The scroll is a constant spiral and most 3D modelers can do that. I don't see any reason why I couldn't make a chuck in Fusion. Then once you have the model you can use some of Fusion'stoolpath generators to create the g-code. The software is free but the skill needed to use it take time.
On Tue, Aug 7, 2018 at 3:41 AM Bengt Sjölund <beng...@tecno.se> wrote: > Hi, > Looking for a g code generator for scroll jaws. > I have a Ø125mm 3-jaw chuck with 6mm scroll pitch and would like to be > able to mill my own soft jaws. > Have bee searching the web but I can not find anything. Any help > pointing me in right direction would be appreciated. > > Cheers Bengt > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
