On Sunday 07 October 2018 15:07:45 Rene Hopf via Emc-users wrote: > thats related to multi spindle, the conversion script seems to be > incomplete. the message about joint-axis is confusing, it just > converts the spindle names. rename the pins to > halui.spindle.0.whatever > if you depend on spindle-at-speed, dont update, as that is currently > broken...
If its derived from a wcomp, reading a spindle encoder it should be okay? I didn't check that for g33.1 or g76 functions on either machine, too hot to muck around much in the shed with TLM. I have an led on that signal on TLM, and it did seem to be working. Or is this actually internal to motion? > http://linuxcnc.org/docs/devel/html/man/man1/halui.1.html#PINS > > > On 7. Oct 2018, at 20:53, Gene Heskett <[email protected]> wrote: > > > > And it wants to do it on both machines I've updated today. > > > > Checking the file, it was new yesterday. > > > > Is it safe? Joints merger has been done once, and I had to do a fair > > bit of sorting to recover. > > > > Doesn't look as if its safe: > > > > gene@lathe:~/linuxcnc/configs/my_LinuxCNC_machine2$ linuxcnc -l > > LINUXCNC - 2.8.0-pre1-3898-g6c5404a > > Machine configuration directory > > is '/home/gene/linuxcnc/configs/my_LinuxCNC_machine2' > > Machine configuration file is 'my_LinuxCNC_machine2.ini' > > Starting LinuxCNC... > > . > > Found file(REL): ./my_LinuxCNC_machine2.hal > > ./my_LinuxCNC_machine2.hal:452: Pin 'halui.spindle.forward' does not > > exist > > Shutting down and cleaning up LinuxCNC... > > Running HAL shutdown script > > LinuxCNC terminated with an error. You can find more information in > > the log: > > /home/gene/linuxcnc_debug.txt > > and > > /home/gene/linuxcnc_print.txt > > as well as in the output of the shell command 'dmesg' and in the > > terminal > > > > Just one comment, that pin does exist in both the old and new > > versions of my_LinuxCNC_machine2.hal. > > > > So something has renamed, or deleted that pin. And likely other > > associated pins since halui.spindle.reverse is next in that list. > > > > Fixes? -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
