thanks to all ... but I prefer use somethings with CE or at least UL certifications provided by manufactorer and not by me. so > dmm-tech seems a good options for my pourpuse .... really I need suggest about servo-drive for servo-motors bldc framless like ... normally the motor manufactorer have a drive too or can suggest a good one
Il giorno lun 29 ott 2018 alle ore 11:10 andy pugh <bodge...@gmail.com> ha scritto: > On Sun, 28 Oct 2018 at 19:21, Mark Johnsen <m...@ijohnsen.com> wrote: > > > I was just reading up on the STMBL and I had forgotten it can communicate > > via Mesa SmartSerial and there's on example on the following page to > > connect it to the 7i77.: > > > https://github.com/rene-dev/stmbl/blob/master/docs/src/Getting%20Started.adoc > > You can only connect one drive by smart-serial to a 7i77 though. > For STMBL it is probably better to have a 7i44 as the daughter card > and use that for drives and GPIO. > > > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
