hi changing number are in linuxcnc where x ok y ok and z axis encoder does not changing. my drive linze and led on it ok. i will swap encoder cable to another drive to see if any change.
On Sun, Mar 3, 2019 at 3:38 PM andy pugh <bodge...@gmail.com> wrote: > On Sun, 3 Mar 2019 at 23:26, a k <pccncmach...@gmail.com> wrote: > > > I just found that encoder on my servomotor stop working. > > I turn shaft and number does not changing. > > Enverything was good yesterday . > > Today not. > > It is servodynamic motor. Company not exist any more. > > Maybe the LED has died. Is there any current flow on the power supply > to the encoder? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users