On Sunday 07 April 2019 14:26:53 Gene Heskett wrote: > On Sunday 07 April 2019 14:14:27 andy pugh wrote: > > On Sun, 7 Apr 2019 at 18:56, Gene Heskett <[email protected]> wrote: > > > Unfortunately, or maybe because I told the edge detector to only > > > outout a 2000 ns pulse when machine.machine-enabled goes false, > > > > Halui runs in user-space, so you might have simply got unlucky. > > In other words, a longer pulse is more than likely required.
So I made the pulse .1 seconds. No effect. > > > I would try setting the pin from the command-line first, if you are > > unsure of its operation. > > I'll do that, and get back to you. > setp wasn't allowed till I commented unhome1's out the the hal file, it was true till then. false when those nets were enabled. So I did a setp halui.joint.0.unhome to true, no errors, no effect. * marker in dri unaffected. setp back to false, no errors, no effect. Beginning to be a puzzle. Your turn & thanks. In the meantime I'll go setup the relay. But since with/out the net, its false, I'll go back to a plus out at the edge.0.out & recheck. > Thanks Andy. > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
