It is master as of a few days ago. The previous version which worked
fine was master from a few months back. I'll get the results of
linuxcnc_info tomorrow.
I'll try 2.8 tomorrow.
Les
On 17/08/2019 20:16, Dewey Garrett wrote:
I'm not clear on details of the install reporting
this problem (commit or LinuxCNC version, os, kernel,
etc). Posting the output from the command:
$ linuxcnc_info
would be helpful.
If using the master branch, you should probably try 2.8
and report. The buildbot instructions at the
bottom of the page: buildbot.linuxcnc.org
don't seem to show 2.8 but you can browse
http://buildbot.linuxcnc.org/dists/
to see if your OS and kernel (rtpreempt or rt(rtai)) have
debs available for 2.8.
For example, in the stretch directory, debs have names like:
linuxcnc-uspace_2.8.0~pre1.5067gf178a1739_amd64.deb
The hash following the 'g' is the commit (f178a1739)
The f178a1739 is the most recent commit for
the 2.8 branch (as of today 17aug19) as shown by
commit listing at:
https://github.com/LinuxCNC/linuxcnc/commits/2.8
If you find an appropriate deb, it can be
installed by commands:
$ wget the_deb ;# copy buildbot link
$ sudo dpkg -i the_deb ;# install the deb
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
